LugerForum Discussion Forums - Artillery Rig ID/Value?

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)

- Artillery Lugers (https://forum.lugerforum.com/forumdisplay.php?f=125)

- - Artillery Rig ID/Value? (https://forum.lugerforum.com/showthread.php?t=26862)

Artillery Rig ID/Value?

I've had an Artillery Luger rig that I inherited - it was originally brought back after WW1 by my great uncle and has spent the majority of the time since then in a dresser drawer in the spare bedroom. What I have is the shoulder stock/leather, take down tool, cleaning rod and the holster itself. There is a stamped hallmark on the stock of a crown over what appears to be a script "S" and there is a number 4895 in the metal piece that would attach to the pistol.

My wife had sold the rig on Ebay but the buyer decided that he didn't like it and returned it - while he had it though, he did highlight the 4895 with something (white-out, paint, toothpaste?) to make it stand out and also the leather embossing on the inside of the holster flap (Schwartzenberger Nurnberg with a date that appears to be 1915). I hadn't tried to remove this because I'm not sure what he used and don't want to damage this antique.

I do want to sell these items, my questions would be what would be a fair value and would it better to sell the items separately or together?

Thanks for the assistance,

Adam

http://i79.photobucket.com/albums/j1...s/DSC05883.jpg

http://i79.photobucket.com/albums/j1...s/DSC05888.jpg

http://i79.photobucket.com/albums/j1...s/DSC05894.jpg

http://i79.photobucket.com/albums/j1...s/DSC05890.jpg

Is the takedown tool proofed?Is the stock broken next to the stock iron?
Bob

"Is the takedown tool proofed?Is the stock broken next to the stock iron?"

Please excuse my ignorance as I'm not a gun guy - not sure what proofed means on this. If it's regarding whether it works, everything looks like it was made but the gun was long gone before I was born and so never had a chance to try it. There is a chip in the wood next to the iron as shown - it's well weathered, looks like it's been there near forever, the wood is NOT cracked and is very strong in the hand.

You show the back of the takedown tool,is the front of it stamped with a crown over a letter or
is it blank?
Bob

Hello Bob,

Both sides of the tool are blank - I've got lots of photos if you'd like to see it. There is the crown and S on the actual stock but the tool is unmarked

http://i79.photobucket.com/albums/j1...s/DSC05887.jpg

I would say the value of the rig is approx. $800 -$900,hope this help you.
Bob