Luger vs Lahti Stock Lugs
 

I don't have a Luger (or Lahti) board stock, but I do have one each of the pistols...

There was a post by someone about a year ago that said a Luger board stock would fit a Lahti...I take that with a grain of salt (yum...salt!)...Here's a couple pics comparing the two...

Also: The Luger lug measures .295" wide and .140" protruding; the Lahti is .300" wide and .141" protruding...The Luger lug has chamfered edges; the Lahti does not...The Luger has a smaller diameter curve than the Lahti...

And the locking slot is in a different position...

As I say, I don't have a stock...but from the relative positions of the lugs, I would say the stock would attach to one at a different angle than the other...

I'll take it on faith that you can mount a Luger stock to a Lahti until proven otherwise...but I'm from Missouri... ;)

Did the poster say that they would attach weird? If they said they'd attach, thats a big difference than attaching correctly :)

I have found that luger stocks attach to lugers poorly and goodly, all depending on the stock and gun. Its why they were individually numbered.

Ed

Here's the thread... :rolleyes:

http://forum.lugerforum.com/showthread.php?t=21997

Sorry about double-posting the pics; I didn't recall posting them the first time around... :p