Need 9mm luger barrel for shooter
 

First I would like to say hello to everybody. This is my first posting.
I am building a shooter. I bought a 9mm aftermarket barrel off of g.b. And installed it. It strings up and down vary bad. I after tring differant ammo and some hand loads. I sluged the barrel. It came out .3575- .358.
I know now what is wrong. Over size bore. Should be for 9mm .355-.356.
So now I need to find a good 9mm 4 " barrel for my shooter. My club has vintage shoots and I normaly shoot a l40 lahti. But I would like to shoot this luger in them also. Just to mix it up some . Any help would be greatly welcomed.
THANKS IN ADVANCE
J. HOWARD CYCLES

Hi,

lugerdoc id here on the forum should be able to assist in your quest
highly recommended parts and services !!!

Gun Parts Sales & Repairs
Tom Heller (Luger Doc)
P O Box 398
St Charles MO 63302
Tel 636-447-3006
Email- hellerarms@webtv.net

Bill

Howard:

Your barrel is in spec., as the original Luger barrels were 9.1mm (.358) in groove diameter.

Send me a private message, with a contact phone number, and I'll tell you how to get that Luger shooting accurately!

Sieger

JH, If all else fails with your present barrel, I do have new 9x100mm barrels starting @$100 and a few vg used serialized take-offs in the $60 to $75 range. TH

Tom:

What is the groove diameter of your new barrels?

Sieger

I only have an inch Mic, so measures 0.353". TH

Bbl.
 

I have a brand new Finnish marked 100mm (4") barrel that I will sell for $50. The front sight is on the bbl., Finnish style not German. It was purchased a few years ago for a caliber change but was never used. MR

So sorry all, upon further inpection it seems I have a Finnish never used 100mm 7.65mm barrel w. front sight.

barrel...
 

Hi marshombre, email sent! ;)... about the 4" .30 bbl..Best to you, til...lat'r...GT

Walther luger barrel
 

Hello all;
thanks for all the replies. I went and checked out lother walther . They are making me a barrel at this time. I wish that i had of gotten time to come back to the forum before i ordered from them. But if this one turns out to shoot great. I will most likely see if i can put togther another one. But thank you all for your time and thoughts on this. I will post the results of the walther barrel when i get it and shoot it.
J. Howard cycles

probably perfect!
 

I already know that the Lothar Walther barrels are probably expensive... but, also keep in mind, they are most likely perfect! I wish they had some standard offerings in .30... I don't even see a blank for it on their site?? :(... Best to all, til...lat'r...GT

Anyone needing 30 Luger bbls, I have several original takeoffs in excellent condition.

lothur Walther barrel
 

Hello everybody:
After almost two months my walther barrel came in today .
It was weel worth the extra time. It looks perfect ! I am goin to install it in the morning. Don`t worry, I have all the correct tools ! If it shoots as good as it looks , it will be one hole !
I will try to post some photo`s of it when I have her finished. If the target is up tor par. I will post that as well. I would like to thank everybody that took the time to help me out .
:jumper:

(John) j.howardcycles,

Please do a photograph essay of your whole barrel changing project and process. The membership, and especially I, enjoy those types of D-I-Y article postings...