LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   Repairs, Restoration & Refinishing (https://forum.lugerforum.com/forumdisplay.php?f=127)
-   -   Firing issues...will she or won't she????? (https://forum.lugerforum.com/showthread.php?t=24345)

tryceman 07-05-2010 12:19 AM

Firing issues...will she or won't she?????
 
I have a comm 6" shooter...It'll usually fire a couple of dozen times, maybe more, and then...nothing.
You can eject the round in the chamber, and see a slight indentation from the firing pin, but no firing...too many times to be a "dud" round, and the fire perfectly from my Beretta, even afterwards.

It's almost like the breech block is "loading up", preventing the firing pin from going all the way forward...or am I just imagining that?
It is a "true" firing pin, not a re-pop.


Anyone with any ideas?

Thanks

FNorm 07-05-2010 09:05 AM

Have you cleaned everything? Including the FP cavity in the breech, and the back of the FP?
Maybe a new spring? Is the breech closing fully? Toggles down and all that? This only happens after being shot a couple dozen times? Heat may play a part.

FN


All times are GMT -4. The time now is 02:38 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com