Newbie Trying to Identify Luger
 

I recently ended up with a DWM Luger, SN 2521. There is no letter anywhere near the serial number on the frame. It has British proof marks on the barrel, and has been painted with a black paint similar to what I've seen on old Enfield rifles. There is no date over the chamber. Any information and value would be greatly appreciated. I can provide further pictures if that would help.
Thanks
http://forum.lugerforum.com/picture....pictureid=1213
http://forum.lugerforum.com/picture....pictureid=1214
http://forum.lugerforum.com/picture....pictureid=1217
http://forum.lugerforum.com/picture....pictureid=1216
http://forum.lugerforum.com/picture....pictureid=1215

I think you may have a 1908 first issue there, but wait for the experts. We need more/better pics of any marks on it.

FN

Hi Jeff, Welcome to the forum. You have a DWM 1st Issue, so called because it was the first year Lugers were ordered by the Imperial Army. Yours was manufactured in 1909. Regards, Norm

Wow, thanks for the prompt replies. I'd be more than happy to provide pictures of any parts that may help identification. How can you tell that it is a first Issue Luger? Is it because it does not have the letter after the serial number?

Your gun may have a damaged breachblock, so if your thinking of one day shooting it, please have it checked out first.

A couple of our members sale parts

Vern

It is a Model 1908, no stock lug and acceptance stamps/proofs on the left side of the receiver. Subsequent issues moved the markings to the right side of the receiver.

What are the signs of damage to the breechblock? Definitely don't want a hand grenade.

Is there any way to tell if it was issued to the military? Or how it ended up in England? If I'm reading it right, it was proofed in England in 1955 in Birmingham. Would there be any way to remove the black paint off the gun? Or would that not be worth while since it has the English proof marks on it anyway?

The 3rd picture suggests that the front of the toggle assembly is bent,twisted,buckled. Firearms are overloaded to pass Brit. proof testing and I'm wondering it that didn't damage yours, however I suppose that they would not have stamped it had damage occurred during testing. Does the toggle function correctly and do all the gaps appear symetrical around the edges?
Unless that picture is an illusion, I'd not let my worst enemy fire it...
dju

I think what you are seeing are the results of the horrendous finish the infamous "British Black" produces, along with perhaps some powder residue..

I think alanint is correct and the apparent distortion of the breechblock is an illusion. Many years ago when I had more time than sense, I bought a British proofed and painted Luger in a pawnshop. I spent many hours over a period of a few days with 0000 steel wool and acetone removing the paint (I'm not sure the acetone did any good, I just kind of wore the paint off). It was worth the effort though. Under the paint was a very nice original finish and the gun looked pretty darned good.

Ahh, okay. Yeah, the picture is just a little off. The block shows no signs of damage and is still symmetrical. Supposedly the owner before me fired it with no difficulties.
Thanks for the warning though.

I'm awfully tempted to try it. From the spots where the paint is missing, the finish still looks good.

Ron,

WOW, Lottsa work.. Do you think one of those big 45 pads would do the trick. Get the paint but not the blueing? https://www.big45metalcleaner.com/Order/

FN

Hi Jeff, I think it's worth the effort. The gun is worth very little in it's present condition. Be sure to post "after" photos. Regards, Norm

Use 0000 steel wool with some type of fluid , gun oil , acetone,Hoppes. I rermoved the paint from an Erfurt, worked well, nice finish underneath. Just take your time and don't get the metal very warm. Bill

Bad picture:
OK, that's always possible, could I see a picture of the rear of the frame? If heavy loads were used might be able to see it there.

thanks

Vern

Done cleaning
 

Well, I completed cleaning the Luger. It turned out better than expected, and I can give very high marks to a spray can of Citristrip that I picked up at Walmart. It took that paint off like nobody's business. Here are the new pictures.
http://forum.lugerforum.com/picture....pictureid=1246
http://forum.lugerforum.com/picture....pictureid=1245
http://forum.lugerforum.com/picture....pictureid=1244

Looks much better


ed