LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   Lugerforum Archive (https://forum.lugerforum.com/forumdisplay.php?f=115)
-   -   7.65mm ammo (great site!!) (https://forum.lugerforum.com/showthread.php?t=2218)

agilis 12-05-2001 12:05 AM

7.65mm ammo (great site!!)
 
I have just found this site, and love everything about it, except for the lugerlust I experience seeing so many beautiful P08s.

I own four Lugers, 1937, 1940, and 1942 military Mausers, all in 98-99% original condition, and a 1920 commercial, in 7.65mm. I fire ny lugers on rare occasions, though I know it may be risky. I recently acquired the 1920, and am having feeding problems. It seems to me that the toggle is not kicking back far enough to pick up a new round. There is no jamming, the first round fires and is ejected cleanly. I suspect the ammo (Fiocci) is not hot enough to cycle the pistol. I wonder if there are replacement springs a bit less powerful than the original. I would prefer not to cut the old spring down. It is a beautiful, bright royal blue, the nicest Luger spring I've ever seen.


Suggestions appreciated.




Thor 12-05-2001 12:08 AM

Re: 7.65mm ammo (great site!!)
 
Agilis, you are RIGHT on target with the AMMO. Fiocchi doesnt work in mine for the same reason, SAMCO is selling SAKO/LAPUA Finnish ammo is a more moderate loading I am told and it is not too expensive. Winchester loading is definetly hot and the SAKO ammo should be tried first. I load my own and it solved my problem! Thor




tom h 12-05-2001 10:22 AM

Re: 7.65mm ammo (great site!!)
 
Agilis, I do have spare original (15 coils) recoil springs available, if you decide to go that route. Please check your spring. If it has 17 coils or more it is probably a replacement 9mm spring. Tom h




agilis 12-05-2001 09:46 PM

Thanks for the advice. (nm) (EOM)
 

bh 12-05-2001 10:19 PM

Re: 7.65mm ammo (great site!!)
 
try swapping clips with one of the other guns you have...if that fixes the prob, then you have figgured it out the





All times are GMT -4. The time now is 11:12 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com