Reloading dies
 

Hi guys, by chance, would any one have a 3 piece set of reloading dies for .30 Luger for sale....reasonable!

Re: Reloading dies
 

I do not have the dies but Lee has them for $27.98 + S&H. Part number 90754. The one that I bought for .30 Mauser works fine so I don't see why the .30 Luger should not work.


www.leeprecision.com


I am not affiliated with the company.

Re: Reloading dies
 

Lee Dies are the ones I use for 30 Luger reloading, but you must have the proper expander plug if you shoot .308" diameter bullets (Western Scrounger sells these bullets) The 30 Luger has a bore diameter around .310" so some of the loading dies are set up for a .310 bullet. I had some problems with this with Lee dies and RCBS dies. I was having the bullets push back in the case when the loading sequence started on the feed ramp. You could even push the bullet back into the case with your thumb. I contacted RCBS and told them the problem and they IGNORED me. I contacted LEE dies and they HELPED me. LEE sent me a proper expander plug so that the cases would hold the bullet better. LEE Dies were very helpful and now I have a great set of dies with two expander plugs, one that works with .308 bullets and one that works with .310" bullets. ~Thor~

Re: Reloading dies
 

Thor, Steve gave me the same lead to LEE. I'll catch up with them and utilizing your very helpful info take it from there, many thanx!

Re: Reloading dies
 

There is a set on Auction Arms right now; item #2047223