LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   Commercial Lugers (https://forum.lugerforum.com/forumdisplay.php?f=123)
-   -   Luger based Target Pistol (https://forum.lugerforum.com/showthread.php?t=20444)

alanint 11-11-2008 03:04 PM

Luger based Target Pistol
 
1 Attachment(s)
Just saw this Luger at The National Arms Museum in Buenos Aires, Argentina.
Is anybody familiar with this variation?

John Sabato 11-11-2008 07:25 PM

A very unusual totally CUSTOM luger... not manufactured that way...

rhinemann 11-11-2008 08:13 PM

Is it still 9 mm?
Jeffrey

alanint 11-11-2008 08:46 PM

Caliber was 9mm, as far as I could tell. Based on the scant information provided, it was apparently built for competition by Argentine arms designer Ballester-Molina.
Other Lugers of interest present, aside from several typical imperial era guns, were a Navy, an Artillery (both in excellent condition). A presentation case of two 1900 Matched Lugers with accessories given as a shooting trophy.
Lighting and glass at the museum prevented any close examination of marking or serial numbers.

lfid 11-12-2008 11:51 AM

alanint ,

thanks !!! for sharing the photo

did the frame front appear to have finger bumps added ?

front sight adjustable ?

rear sight welded to the toggle ?

bottom of frame blocked off ?

very unusual frame , grips , and safety setup

does this museum have a web site ?

thanks
Bill

alanint 11-12-2008 02:15 PM

I've found only one web mention so far. A visit by a Spanish enthusiast. Written in Spanish, unfortunately.

http://www.armas.es/narticulos-Museo...os/000257.html

To answer some of your questions;
The frame had finger bumps as an integral part. It is as if they had cast a completely new frame unit including finger grooves. Another unusual variation were two large leafs extending down from the grip to completely enclose the magazine bases, which could only be grasped from front and rear. I don't think the standard magazines displayed with th gun would work. The magazines this gun would accept would need to have the lugs on the base flush with the magazine tube.
A sight base appeared to be welded to the rear of the frame, with clearance for the last toggle link to reciprocate within this base. An elaborate adjustable sight was afixed on top of this. The front sight appeared adjustable for windage via a spring-loaded catch and rack, (rachet). No tools needed, simply press latch and slide sideways. There was a wide trigger shoe on display for this gun as well.

SIGP2101 12-04-2008 03:23 PM

I like it, I want it!

lfid 12-05-2008 01:42 AM

alanint,

thanks for the added details !!!

very interesting luger

Bill


All times are GMT -4. The time now is 02:58 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com