LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   Lugerforum Archive (https://forum.lugerforum.com/forumdisplay.php?f=115)
-   -   Luger Jamming (https://forum.lugerforum.com/showthread.php?t=1804)

Kyle 10-01-2001 11:04 PM

Luger Jamming
 
I got my Luger (I asked some questions about it a few weeks ago) and it turned out to be (according to the Luger handbook) a 1920's military police with 95% bluing in 'good to excellent condition. I took it to the range, and, as a poster said below, after some oooing and awwing and pushing back the people salvating over it, I loaded it up (new mags) and started to fire. Well, the first 3 rounds went ok then..jam. The bolt slides down over the bullet and shoves it up and almost out of the receiver. Like it's not giving the bullet enough time to come up. It did this a few times, someone who knew about Lugers told me they do this a lot. I said Ok and went on firing. I went back the next day and the clip I used did this every shot. I switched to the other clip.put through 15 rounds, no jams. I was using 115 grain Winchester FMJ (yes, I know not to use hollow point) 9mm Luger rounds. I read in your forums archives to use 124 grain. I'll try that (Winchester makes it). Do Lugers naturally jam a lot or is mine perhaps somewhat broken, or is my clip bad? I have 90 days of free gun smithing ( I told you I bought it a great shop) if there's a problem. What a good ammo to use? I'll use the one good clip (the spring seems tighter on it) and that one seems to have no problems. Any help would be great. Thanks.




Thor 10-01-2001 11:30 PM

Re: Luger Jamming
 
I bet the mag spring is weak!




Kyle 10-01-2001 11:34 PM

Re: Luger Jamming
 
That's what I'm thinking. I've been reading some more, I'll try some stronger ammo in it too....I love the pistol though, it feels so natural. That and making other shooters jaws drop when I pull it out. Then they come and see that it hasn't been reblued, and their jaws drop again.




66mustang 10-02-2001 12:09 AM

Re: Luger Jamming
 
Of the two Lugers I have shot, one jams much more often than the other. The artillery I have will fire lead and hollow points much more often and when I had some machine gun 9 MM, then fed like a son of gun through it. (I didn't fire than many through it, she's been reblued, but otherwise is all matching).


So, my point is that with good magazines and smoothed feeding ramps, my expericne has shown that Lugers feed fairly well, although my 4 inch jams much more often than the other.


Ed




John Sabato 10-02-2001 10:25 AM

Re: Luger Jamming
 
You should use the same ammo that works fine in the good mag and either replace the mag that jams or try an new spring (wolf springs) until the same ammo works in that one too.


-John




HÃ?Â¥kan Spuhr 10-02-2001 05:04 PM

Re: Luger Jamming
 
There is no reason to accept that the luger is jamming.

I see 3 very common problems.

bad mag

weak ammo

too strong recoilspring


Regards HÃ?Â¥kan




Kyle 10-02-2001 06:49 PM

Re: Luger Jamming
 
Is the spring hard to replace? I might try that if stronger ammo doesn't work...




Kyle 10-02-2001 06:51 PM

Re: Luger Jamming
 
Gah, sorry, forgot to add it...what's a good new market mag to try? The one that works is a Mec-Gar...




HÃ?Â¥kan Spuhr 10-03-2001 01:28 AM

Re: Luger Jamming
 
I always recomend new mags, espesially since lugermags gets so battered when shooting with them.

Personally i use Tripple K mags.

The spring is a bit tricky to replace, but its no problem.


Regards HÃ?Â¥kan






Kyle 10-03-2001 02:39 AM

Re: Luger Jamming
 
Ok, thanks. I'm going to the Del Mar Gun Show on Sat..I'll pick up some 124 grain 9mm and I'll order a new spring from Wolff (what size etc do I need for a 4 inch Luger). One more thing...HÃ?Â¥kan (You've been VERY helpfull by the way.., and I thank you)..is 124 grain big enough? Should I look for a higher grain? And...are the 147 grain Hydra Shok Federal rounds ok to shoot? It's not ball pointed so I'm assuming no...


--Kyle




Thor 10-03-2001 02:47 AM

Re: Luger Jamming
 
IMO, the 124 gr is perfect! I prefer the 115 over the 147 because it is closer (9 vs 25) in weight to the original loading. I believe Wolff provides a 5 or 10% over std weight for the mag spring. You really need a loading tool with these if you are shooting more than a few magazine's worth, they are hard to compress. Thor




HÃ?Â¥kan Spuhr 10-03-2001 11:36 AM

Re: Luger Jamming
 
I think the 124 gr bullets will be enough for you.

I havent ever used any heavyer my self.

Mostly of my shooing is done with 124 gr bullets.


But my gun have been shoot a lot with submachinegun ammo to with 105 grain ammo.But this is aboslutley not recomend.


Regards HÃ?Â¥kan



http://www.vapensmedjan.com


All times are GMT -4. The time now is 06:58 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com