![]() |
Replacement main spring?
OK, I read the previous posts about folks having problems with toggle not lockig all the way forward. Sounds like I need a new main spring. Correct? Tried another magazine and different ammo. No dice. Where do I get the main spring from? Are there different ones?
TIA Vit |
Just wanted to add that I did look at Wolff Springs, but they have 3 different weights. I just want to do it once and be done. Whast would be the correct one? Also, Numrich has springs, but I believe most of their stuff is used.
Vit |
Get the whole set for about $13.00 with shipping
http://www.gunsprings.com/ I'd had the same problem. I replaced the springs on my lugers and c96 mauser. Now shoots better than ever. |
Vit, I don't remember the exact poundage one you need, from memory I think it was considered the "standard" weight, would be what Lee above pointed to in his link.
ed |
This?
SERVICE PAK - TYPE I contains the following springs to replace weakened or broken springs, returning the pistol to original factory condition: recoil spring, striker spring, extractor spring and trigger spring. Stock No. 69201 -Type I.....$ 9.99 ea Thanks guys. |
Vit -
As I understand it, yes, you could use the Service Pak - Type I which contains the main spring, and several others. It has the "Facory Standard" 38 pound spring which by itself goes for $7.89. If you want to restore you pistol to original specifications, I would not use the 36 or the 40 pound springs. Mauser720 - Ron |
All times are GMT -4. The time now is 08:49 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com