LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   Lugerforum Archive (https://forum.lugerforum.com/forumdisplay.php?f=115)
-   -   Coloring Proofs (https://forum.lugerforum.com/showthread.php?t=1776)

Duane Rowland 09-26-2001 10:21 AM

Coloring Proofs
 
How would I go about coloring the proofs on my 1920's commercial? What type of substance would I use, and how would I apply it? With a toothpick or tiny brush?


Thanks for the help!


-Duane.




Art Buchanan 09-26-2001 11:00 AM

Re: Coloring Proofs
 
Use a white putty (paint) stick available at paint and hardware stores. They are available in lots of colors and are used to fill nail holes in wood trim. Remove oil from the marks with laquer or acetone or? then just rub the paint stick over the markings. Wipe the area with rag and mineral spirits to remove excess paint from the area. The white will remain in the depressions of markings. Wipe area with oil rag. Also works to white in missing safety marking.




Dok 09-26-2001 07:59 PM

Re: Coloring Proofs
 
Perhaps an equally effective and less permenant or damaging way is to use a white china marker pencil. Available at most office supply stores.




Art Buchanan 09-26-2001 10:00 PM

Re: Coloring Proofs
 
Paint stick color will clean off with mineral spirits, Laquer thinner, acetone, gasoline whatever, They are the same thing that Shattuck has sold for years---just cost less!




Marvin 09-27-2001 07:29 AM

Re: Coloring Proofs
 
Duane,


I use the White China Markers to color in my stamps. I apply a light coat of oil, let the carrier dissepate, and then rub the China Marker into the stamps and then wipe lightly with an oily cloth. On light stamps, you must rub very gently or the color will rub out.


The more permanent types like the Laquer-Stik are nice, but it does take a solvent to remove them as the China Marker will wipe out easily with an oily cloth, and the China Markers are cheap.


Marvin




TIMOTHY CANNEY 09-27-2001 10:13 AM

Re: Coloring Proofs
 
Get A GOOD MAGNIFING GLASSS LOUPE. NO DAMAGE EASY IDENTIFICATION, NO MESS!


TIM




bill m 09-27-2001 01:40 PM

Re: Coloring Proofs
 
Hi,

Using any kind of a white marker is great for seeing the markings, but when issued only the safety area was marked. Also, markers are used to hide recent stampings and property markings.




Dok 09-27-2001 09:15 PM

Re: Coloring Proofs
 
It has been suggested in the past that the stamps should only be "coloured in" for photographing, then removed afterward, so as to return the weapon to it's original state as bill m suggests.




TIMOTHY CANNEY 09-28-2001 09:52 AM

Re: Coloring Proofs
 
I agree!


Tim




Duane Rowland 09-28-2001 11:21 AM

Re: Coloring Proofs
 
So, it would seem that the consensus is that only the "Gesichert" saftey marks were colored from the factory, with the rest being left blue. And the pictures I've seen with gold or white highlighting on the marks were only for the purpose of making them show up in photos. Okay, I can see that. Thanks for your response on this, folks, it's been valuable.


-Duane.





All times are GMT -4. The time now is 12:16 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com