LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   General Discussions (https://forum.lugerforum.com/forumdisplay.php?f=128)
-   -   Magazine Loader? (https://forum.lugerforum.com/showthread.php?t=16473)

freshmeat 02-15-2007 03:06 PM

Magazine Loader?
 
Hello, I just bought my first luger and was wondering if there was an easy to use/effective magazine loader on the market? I went through the pistol..a 1921 DWM and replaced all the major springs including the mag springs. Now it functions flawlessly with Ball ammo, but I can hardly depress the loading button to get the mags full.

Any help would be very appreciated!!!:D

B

shadow 02-15-2007 03:51 PM

Yes,

Lugerdoc sells a good quality loading tool.

Here is a video of the loading tool that I bought from Lugerdoc in action.
luger tool video

Chris

freshmeat 02-15-2007 04:31 PM

thanks S.! Do you know of any others...just wondering if there's a selection?:) Also does lugerdoc have a web site?

I really appreciate it!

Edward Tinker 02-15-2007 05:41 PM

There are hundereds of assorted loaders on the market. repro and real. DWM made them, Erfurt made them, Simson made them, Krieghoff made them, Mauser made them, etc...

I had a repro one and when I went to use the "screwdriver" part of it, it bent. I threw it away and only use original tools to this day.


Ebay has many for sale, many repros, some real.

Ed

PS: welcome, odd user name ;)

freshmeat 02-15-2007 10:27 PM

thanks for the welcome Edward! So ebay is the best source then? Can you give me and idea of what I should pay for an orriginal?

MFC 02-16-2007 02:54 AM

I got a nice original loading tool from lugerdoc for $30 plus $2 shipping.
Be careful on Ebay if they state original. It may or may not be so. Also look at shipping charges, some of them charge $6--$8.
Lugerdoc's email is hellerarms@webtv.net
Good luck,
Mike C.

Edward Tinker 02-16-2007 02:59 AM

I have a police tool ebay right now. I expect it to go up a it, but not much, it is at $50 right now. It is an original one, albeit not the prettyiest.


Ed

freshmeat 02-16-2007 08:33 AM

thanks very much guys!

Alx 02-18-2007 07:04 PM

The repro tool copies can be just fine, if they are hardened properly, and have the ridge/rabbit and rabbited inside ledged hole for the mag. follower button. IMHO, the original tools often have too short a blade, width-wise, and are not as good at driving the grip screws as a tool with a wider blade, if the thickness is correct too.
As for the firing pin, I have always found it easiest and fastest to just use the pad tip of my finger to depress and turn the spring's retainer pin in the breech block. No need to flex the joint as far, fumble with an additional piece of metal tool, or risk scratching something.


All times are GMT -4. The time now is 08:24 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com