LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   Repairs, Restoration & Refinishing (https://forum.lugerforum.com/forumdisplay.php?f=127)
-   -   Firing Pin Spring Retainer stuck (https://forum.lugerforum.com/showthread.php?t=14385)

Knucklehead 04-15-2006 08:57 PM

Firing Pin Spring Retainer stuck
 
The Firing Pin Spring Retainer is stuck in the Firing Pin assembly on my S/42.
It's the screw that is given a 1/4 turn to hold the spring compressed, although in my case the screw has not been turned, it's just stuck down in the collar about 1/16" deeper than it should be. It's probably a small burr or some dirt that's holding it. I don't want to damage it,
any advice on how to remove it safely?
Thanks!
Robert

Update.... was able to vibrate it out, found a small burr that probably caused the jam.


All times are GMT -4. The time now is 08:42 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com