LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   Luger Accessories (https://forum.lugerforum.com/forumdisplay.php?f=126)
-   -   What would be the correct loading tool and magazine? (https://forum.lugerforum.com/showthread.php?t=12245)

JD 06-15-2005 02:32 PM

What would be the correct loading tool and magazine?
 
I have a nice 1936 dated S/42 Mauser P-08, serial number 752 h. It currently has an un-numbered FXO aluminum bottomed magazine. I would like to find a correct loading tool and find out what would be the correct type of magazine. I would greatly appreciate any information as to what is the correct loading tool and magazine.

Thanks!!!!

thegundude 06-15-2005 03:15 PM

Not sure about the mag, but you'll have to check the waffenampts for the correct tool marking. What does the proof look like?

Frank 06-15-2005 04:11 PM

JD, the correct tool is one marked with a droop wing eagle-over-63 (DE/63).

A proper magazine had a shiny nickle plated tube with an aluminum bottom. The markings on the bottom are any number with an "h" suffix and Waffenamt DE/63. Any "h" suffix magazine with this nickle plating will automatically be marked with a DE/63 unless someone has messed with it.

Good Luck!!

Lugerdoc 06-16-2005 10:20 AM

JD, Sorry no nice DWE/63 mags available at the moment, but I do have the correct marked loading tools in the $60 to $75 range. TH

JD 06-21-2005 12:08 PM

Thanks everyone for all the information!!!!!!!!!

Tom, I 'll send you an email about the loading tools.


All times are GMT -4. The time now is 12:32 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Lugerforum.com