LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   All P-08 Military Lugers (https://forum.lugerforum.com/forumdisplay.php?f=122)
-   -   Franken Luger (Pics Added) Artillery Model (https://forum.lugerforum.com/showthread.php?t=39903)

northwind 10-01-2019 10:51 AM

Franken Luger (Pics Added) Artillery Model
 
Need help. I got a Luger from a deceased friend's wife. She is interested in selling, but she not sure what the price range might be. Here's the problem, its made up of various part from a least two separate pistols. The frame is a 1917/1920 DWM with a 589 serial number. The barrel is 7" and is also a 589. Most of the other parts are 1432 Serial numbers. The pistol has been re-blued with a high luster bluing. The pistol also has fake mother of pearl grips. Lastly, the magazine has a wooden toggle with a 7110 serial number. Any help or thoughts would be appreciated.

DavidJayUden 10-01-2019 11:29 AM

Sounds like a shooter grade Luger but we don't know if it shoots. No one wants to be viewed as taking advantage of a widow, but proceed cautiously. Pictures would help, but it is sounding like a $600 gun to me.
I assume it is 9mm. Holster, spares, etc?
But let's see what the others say.
dju

northwind 10-01-2019 11:43 AM

I'm not buying, I'm just trying to get some sort of a guesstimate price for her, so she has a rough idea of value. I have a matching number WWII Mauser Luger of my own, so she came to me for help. This thing is way beyond my knowledge, though.
It is 9mm and as of yet, she hasn't found anything else that would go with it (holster, mags, etc). I assumed as you did, it would only be a shooter grade, but with the longer barrel (7inches), I thought that might bump the price up a little.

Karl 10-01-2019 11:52 AM

Dennis,

Sight unseen, your description seems to indicate that you see this as not an especially desirable Luger. Unless you are keen on buying this particular Luger I suggest shopping around for whatever suits your interests and budget. My, rough, off-the-cuff estimate for a mis-matched, re-blued, re-barreled?, buffed up? Luger would be around $700. If you want the gun, you might offer a set amount above an offer made by a local pawn shop.

KFS

Doubs 10-01-2019 01:14 PM

How are you measuring barrel length? Properly, you close the breech (unloaded, of course) and drop a pencil or other rod down the bore to contact the breech face. Mark the rod at the muzzle, remove and measure.

I ask because 7 inches is an unusual length.

DavidJayUden 10-01-2019 01:33 PM

Also, the rear sight is fixed on the toggle and non-adjustable?
dju

northwind 10-01-2019 02:48 PM

Learning a lot already. Miss measure on the barrel. After I did it the right way, it's 8 inches.

It has a ladder type sight. At least, that's what I think they call them. It adjusts to 800 yards.

Will try to send pictures.

sheepherder 10-01-2019 03:16 PM

Quote:

Originally Posted by northwind (Post 327948)
Learning a lot already. Miss measure on the barrel. After I did it the right way, it's 8 inches.

It has a ladder type sight. At least, that's what I think they call them. It adjusts to 800 yards.

Will try to send pictures.

An artillery Luger with sharp edges (regardless if reblued) is in the $800 - $1000 range. Even if mismatched. :thumbup:

(With sharp edges means it hasn't had the snot buffed out of it).

DavidJayUden 10-01-2019 03:32 PM

We definitely need to see photos.
dju

lugerholsterrepair 10-01-2019 03:58 PM

Mismatched parts and monkeyed with some..it's a shooter IF IT SHOOTS but it may not. THAT would affect it's value.

northwind 10-01-2019 04:13 PM

Im a senior citizen, so computers is not my strong suit, but I have help. I will send a picture as soon as help arrives.

Tomorrow, I will take it to the range and see if it shoots. It looks like it should work just fine, but you never know.

Will keep everyone posted with the progress.

Have a friend that does bluing, ceracoat, and duracoat.
Will check with him about the sharp edges. He should know.

DavidJayUden 10-01-2019 04:58 PM

Numerous photos, the more the better. Close-ups.
dju

Mac Cat 10-02-2019 12:48 PM

If it looks as good as you say and if it shoots reliably, I think it's worth $1,000+ with the long barrel.
They are fun to shoot.

But, in cases like this, I'd happily pay too much for it.

lugerholsterrepair 10-02-2019 12:51 PM

It HAS to have a stock lug to be worth much.

northwind 10-02-2019 01:06 PM

Went to the range today. Took a box of Remington UMC 115gr FMJs. Shot two full mags. Gun worked perfectly. No failure to feed, no failure to eject, no jams. I thought that was great considering the UMCs aren't the best ammo. Did not try for accuracy, just function.

Picture guy should be here tonight, so will probably have pictures tomorrow.

Gun does have shoulder stock lug.

northwind 10-02-2019 08:09 PM

5 Attachment(s)
Her are some pictures. Let me know if any others are needed. I also found 2 more mags.

northwind 10-02-2019 08:17 PM

6 Attachment(s)
And some more

lugerholsterrepair 10-02-2019 08:44 PM

I've seen a lot worse for a re blue! Not buffed too badly. The MOP grips actually fit pretty well. With proper wood grips it would look a lot better IMO. Given your range report..It should be worth $1,000 as a shooter. Tough to squeak out too much more with the mismatched numbers..The mags you found COULD be worth a hundred each depending on originality.

DavidJayUden 10-02-2019 09:39 PM

I had quoted $600 earlier, but given the new info. I believe that $1000 is very reasonable. Lots of demand for artillery shooters, and few of us are willing to take a collector-grade gun to the range.
dju

sheepherder 10-02-2019 11:10 PM

1 Attachment(s)
Quote:

Originally Posted by lugerholsterrepair (Post 327967)
I've seen a lot worse for a re blue! Not buffed too badly.

+1 :thumbup:

You have 'fine tune' rear sight; I can't see well enough to make a judgement on the front...Ah, yes! The front sight is fine tune also. :)




All times are GMT -4. The time now is 04:26 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com