LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   Lugerforum Archive (https://forum.lugerforum.com/forumdisplay.php?f=115)
-   -   Re: Armadillo gun question for Hugh (https://forum.lugerforum.com/showthread.php?t=3696)

Hugh 05-08-2002 02:36 AM

Re: Armadillo gun question for Hugh
 
Rick,


I bought the toggle already made up from Tom Heller. There is a small block soldered to the rear of the toggle to support the sight. The front mounting screw is tapped into the toggle, the rear elevation screw works normally.




http://boards.rennlist.com/upload/ArmadilloGunr.jpg

Hugh 05-08-2002 11:52 AM

Re: adjustable sight dreaming
 
Rick,


In soldering the guards on the knives I make, I have found that the solder-flux combo in paste form seems to work best. Second choice is Brownells Hi-Force 44.




Brad 05-09-2002 12:41 PM

Silver solder supplier
 
Here's an outfit that sells the silver solder paste in a syringe for $7.95. It's a lot cheaper than Brownells $25. They also sell other types of silver solder used in the jewelery trade. Hope this helps.



Starr Gems


All times are GMT -4. The time now is 12:10 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Lugerforum.com