Shooter Problem
I have a BYF 42 shooter that has a Sarco artillery barrel on it. It shoot great except the toggles do not completely close after each round. You have to do it by hand. Will a 40 pound Wolff main spring fix this problem? I have been shooting 124 grain Federals with 1120 fps at the muzzle. Thanks for your time and info. Chris
|
Chris,
Is the hold open engaging and locking the bolt open? If so, try moderate velocity 115gr ammo. Don't use +P, it will damage your luger. Lugers often don't care for hot ammo or heavy bullets. Ron |
Not sure if this can happen or not.. but I remember from a slow motion movie that the toggle bounces back a little after hitting the ramp, perhaps with that 'hot' ammunition, it bounces back to the point where firing pin gets locked up? Just a thought..
|
Chris, Since many new luger barrels are made short chambered (they expect the installer to do a final chamber ream for the correct headspacing, I'd check that first. Then check the recoil spring to be sure it is for a 9mm (19 to 21 turns), and finally try different ammo & mags to see if this makes a difference. Lugerdoc
|
All times are GMT -4. The time now is 10:24 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com