Help with Identifing Markings 1914 P08
Hello all, I am new to these forums I love collecting WW2 and WW1 Military collectibles I always wanted a luger just never saw one that cought my eye until recently. I am no expert so I apoligize for the lack of knowlege.
I do know its a dwm 1914 that much is clear. I am told its a Military from WW1. The story on this is that it was brought back by a US GI after WW2. It came with a holster with the nazi eagle stamped with WaA788. It had a QMC 499 tag on it. When I went back to pick it up someone who worked there lost the QMC tag :crying:. If this was made in 1914 this could of seen use through WW1 and WW2 possibly ??? I wish this thing could talk to me then I would know for sure but we all know it does not work like that. :cheers: Does anyone know what these markings mean. All sn match on every part of it except the magazine that has a wood bottom. benethe the barrel looking from the front it shows 8,82 What is that? (I could not get a good pic of that everything else see attachments. Thanks for looking. http://lanzafame.org/pic/20120918_222345.jpg http://lanzafame.org/pic/20120918_222431.jpg http://lanzafame.org/pic/20120918_222511.jpg http://lanzafame.org/pic/20120918_222526.jpg http://lanzafame.org/pic/20120918_222544.jpg |
Hi Sam,
Welcome to the forum. Nice 1914 Military. 8,82 is the bore gage measured from land to land in millimeters. The europeans use commas instead of decimals. |
Forgot to add the full pictures.
Thanks Mike. I realize this is probably nothing rare or special but it looked to be in very nice condition and I could not pass it up. I don't even know if I ever want to shoot it. If I do it would only be once just to say I did. I have a commercial beater from 1942 thats in rougher shape for that. http://lanzafame.org/pic/20120918_230549.jpg http://lanzafame.org/pic/20120918_230602.jpg Are the markings in any of these pics unit markings? |
Unit marks are usually on the front grip strap.
Good decision not to shot it but, I know how you feel. Shoot the beater instead. The metallurgy was more advansed in 1942 than 1914. |
Does anyone else find those halos somewhat different?
|
They look artificial?
|
The halos do look odd but not out of the question. The appearance of halos depends on a lot of factors, the particular batch of steel used in making the part, the strength and depth of the die strike, the conditions under which the gun was stored over the years, on and on. The appearance of the halos on this piece somewhat resemble the halos that were created on high dollar forgeries by micro-bead blasting. However, the halos on this gun are a bit more precise than the fakes I have seen, and while not a run of the mill Luger this gun is not of the elevated value that would warrant such fakery. I think the gun is likely legitimate.
|
Could be the glare from my flash I'll take better pics later. I noticed that pic shows an outline. In person it ddoes not look like that
|
I am a crappy photographer so sorry guys.
Not sure if it helps but I took some different pics disabling the flash and using some different colored back ground cloth. The blue tarp I used on the previous pictures tends to reflect light and cause unwanted glare etc.... http://lanzafame.org/pic/20120919_213033.jpg http://lanzafame.org/pic/20120919_213043.jpg http://lanzafame.org/pic/20120919_213122.jpg http://lanzafame.org/pic/20120919_213135.jpg http://lanzafame.org/pic/20120919_213652.jpg http://lanzafame.org/pic/20120919_213732.jpg http://lanzafame.org/pic/20120919_213802.jpg The flag I know does not really fit this time period but it was the closest thing black I had to mute out ambient light. I see no unit marking on the front grip strap. |
That's better. It looks original now... It was the flash that made it stand out so much.
|
Thanks Mike I feel better about it. As I really do not know much about these guns. I have been collecting WW2 era items and weapons for years in my collection. This really intriuged me with its markings. The fact that it had the QMC 499 tag still on it gave me that feeling that I would of loved to add this to my collection. The first picture shows Imperial proofs right??? What do they mean Looks like SCS ??? Can anyone recommend any good books on the history of these weapons and markings?
Sorry to ask so many questions. This is my first WW1 piece and I am very interested in learning as much as possible about it. The last piece I purchased was a K98 that a WW2 GI took off a rack from a concentration camp Weapons room ! I found out later that it was a rare find but thats a discussion for the K98 forums ; ) Thanks guys for all your insight. |
I still feel that the large "cloud" halo around the bore guage mark makes the halos in general suspect.
|
Higherauthority, Nice original Luger, a terrific find! One thing about the internet that you probably already know. No matter what gun you post, no matter how original it appears to be, there will always be posts that question it! Everyone is welcome to their view of course! No problem there. But I for one just look at the majority response and don't worry about the ever present contrary view. In this case I too find the "cloud" halo to be somewhat unusual! But I see no evidence that his gun is anything but original none the less.
|
Quote:
http://forum.lugerforum.com/showthread.php?t=18438 |
Quote:
The haloed areas around the characters look weird in two ways. First, the edges of the halos in question are fairly distinct, and I'd expect them to fade out gradually as distance from the displaced metal increases--more of a gradient effect. Second, they are lop-sided--I think more than could be accounted for if the die were tilted a bit to one side when struck. To reproduce this effect, one could dab a bit of rust/bluing remover onto each letter with the intent of lightening up the bluing in the area. Viewing the pics full size, the halos' distinct edges are pronounced. The "X-ray" effect of the flash may be revealing this, as it appears to show a small "puddle" area associated with each character. Ron's point about this example's not being worth the fakery is well taken. Comparison--same resolution, same lighting--to another, but known, example would help. Has anyone had the same effect occur when taking a flash pic of any other original Luger of similar date of manufacture? |
While I can't locate any specific photo examples of the "halo" being enhanced by the camera flash, I do know that I have seen similar photos.
IMHO the gun is authentic, and that the difference in the appearance of the structure of the metal surrounding each number that results from the impact of the stamping (and causes the halo) is the result of the flash lighting... Welcome to the Lugerforum Sam. It is always great to have new enthusiasts in the collector community. |
Hi Sam, and welcome to the forum.
You've got a very nice collectable 1914 DWM Luger. s/n 7623b. In general don't worry about disclosing the s/n. It helps those that maintain lists of known Lugers. In the future that is about the only think that will protect collectors by helping determine provenance and prior ownership. Another Luger very close to your's in the "b" block has Crown/S Crown/G Crown/S ( C/S C/G C/S) acceptance proofs, which I believe is what's on your pistol's receiver. The eagle symbol is the imperial acceptance proof. You'll get the best photos by using a tripod, the camera's closeup setting; shutting off the flash and using the self timer to prevent camera shake. Take the pictures on a dull grey or black background using shaded natural sunlight. The finish issues in the early photos are from reflection of the flash and over exposure. Do you have a matching or period magazine for this pistol? Post some pictures of the holster and it's markings. Any specific questions about your Luger? Marc |
Wow you guessed it right on the money 7623 is the sn. .uunfortunately the mag sn is the only one that does not match but it does have a walnut base. Well it looks like walnut. Dam now I want to get another one from www2 with ww2 era proofs. I can't believe the level of precision the Germans had back in 1914. I am not German but they seem time be some of the best engineers !
Here are pics of the holster and mags http://lanzafame.org/pic/20120920_162013.jpg http://lanzafame.org/pic/20120920_162019.jpg http://lanzafame.org/pic/20120920_162551.jpg http://lanzafame.org/pic/20120920_162555.jpg The wood mag came with the 1914 the other that has the stick eagle and a #20 came with my beater 1942 commercial Luger. I am assuming that who ever carried this luger cut the flap off the holster for easier/quicker access to the weapon ???? Was it common for these guys to do that? Quote:
|
The only record that associates an individual with his firearm was his personal soldier book. There was a second book kept at unit level, but finding these is next to impossible for an individual soldier unless you already know their name, and the family or someone has the book.
Not all firearms were unit marked. Others that have studied them can give you details about the marking laws. The magazine pics are just fuzzy enough to make it hard to judge the stampings. The bases look good to me, and they are probably period. A better look at the bases and the sides could help confirm. In that condition, the holster wouldn't appeal to a collector. That said, it looks like it probably was a reproduction. I haven't seen a "P.08" stamped in that font. Marc |
Hmm The guy I bought these from had 2 this nice 1914 one and a more beat up one from 1942 commercial. in the case they were not sure what holster went with what gun. Im going to get a better camera and take pics of both holsters and a better pic of the mag bottoms. Again I suck at photography lol . I only have my cell phone camera now my buddy next door has a nicer camera. I am almost wondering if they mixed up the holsters. The other one is brown he thought it went with the commercial Luger wait I just noticed a crown with a letter on the back of the other one hmmmm the only other stamp is Nuremburg on the inside flap
|
All times are GMT -4. The time now is 11:44 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com