LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   New Collectors Forum (https://forum.lugerforum.com/forumdisplay.php?f=133)
-   -   1913 dwm (https://forum.lugerforum.com/showthread.php?t=39180)

Mark1 12-22-2018 01:42 AM

Referring to Ron Wood's excellent "Early frame tutorial" for comparison, I would have said this frame is a Type V. If that's the case then it could be from a (short frame) 1906 Commercial, with grip safety ?
Mark

DonVoigt 12-22-2018 08:49 AM

Quote:

Originally Posted by Mark1 (Post 321807)
Referring to Ron Wood's excellent "Early frame tutorial" for comparison, I would have said this frame is a Type V. If that's the case then it could be from a (short frame) 1906 Commercial, with grip safety ?
Mark

Could be, if the serial number has been removed/replaced.

Leed709 12-27-2018 09:33 PM

1913 dwm
 
Sent more pic. of inside of Luger, but I don't see them posted yet. Both the serial no# match on the upper receiver and the lower frame. I counted the coils on the recoil spring and it look 15- 16 coils. Have you guys given up or are you still trying to figure it out? Hope you guys had a great Xmas.

DonVoigt 12-27-2018 11:09 PM

Quote:

Originally Posted by Leed709 (Post 321962)
Sent more pic. of inside of Luger, but I don't see them posted yet. Both the serial no# match on the upper receiver and the lower frame. I counted the coils on the recoil spring and it look 15- 16 coils. Have you guys given up or are you still trying to figure it out? Hope you guys had a great Xmas.

Tough to count springs in a picture- 15-16 sounds ok.

If you will post the picture of the inside "well" that I asked for, we can likely ID your frame. See my previous post for the picture to take.

Leed709 12-28-2018 11:04 PM

1913 DWM Luger
 
Took more pic. of inside of pistol. Took pic of inside of pistol well where take down lever passes through. These pic. were sent to 4 Scales.

4 Scale 12-29-2018 11:53 AM

6 Attachment(s)
Here are the latest batch of photos including the frame well. I have done what I can to enhance, but these are very low resolution and there just isn't much to work with.

DonVoigt 12-29-2018 02:09 PM

I can see markings in the well, but not good enough to ID.
Got to be closer and in focus, and with the lever in its closed position please, or removed.

4 Scale 12-29-2018 02:40 PM

Yes, the frame well needs to show detail equivalent to post #37.

Leed709 01-04-2019 08:19 PM

1913 DWM frame well pic
 
Did you get the 2 pic of the inside of frame well that I sent today? Hope this was what you were looking for.

4 Scale 01-05-2019 01:13 PM

2 Attachment(s)
Here they are.

Leed709 01-06-2019 10:50 PM

Pic of lower frame well
 
Were you able to see the marks in the frame well?

DonVoigt 01-07-2019 09:46 AM

Quote:

Originally Posted by Leed709 (Post 322123)
Were you able to see the marks in the frame well?

No,
too much reflection. The key is can you see an "N" or circled "N" in there, or some other markings that you can describe to us?

4 Scale 01-07-2019 07:50 PM

Quote:

Originally Posted by Leed709 (Post 322123)
Were you able to see the marks in the frame well?

I think the major problem is low resolution. The photos you sent me were only 30K in size, which is very small and doesn't really let me enhance. I would encourage you to play with your smartphone or borrow a better camera and try to take bigger/sharper photos. This forum will allow us to post photos up to 195K size, which is over six times more data than were in your photos. All other things being equal, six times sharper/more detail.

cirelaw 01-08-2019 10:24 AM

Take it outside in the shade~

Leed709 01-10-2019 11:44 PM

Will try to get better pic. of inside of well this week end outside if it is not raining. The marks in the well are C O 8 and the forth mark look like a arrow head.

Leed709 01-16-2019 04:57 PM

Took 3 new pic. 2 of inside of frame well and 1 of barrel that shows the cross clearer.

Leed709 01-17-2019 12:56 AM

4 Scale did you get the last 3 pic I sent you.

4 Scale 01-17-2019 12:57 PM

No photos received.

Leed709 01-17-2019 03:16 PM

1913 dwm
 
Resent pic today.

4 Scale 01-17-2019 11:13 PM

1 Attachment(s)
Here's another.


All times are GMT -4. The time now is 01:30 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com