LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   Off Topic & Other Firearms (https://forum.lugerforum.com/forumdisplay.php?f=142)
-   -   Yugoslavian M57 Tokarev hammer group quirk! (https://forum.lugerforum.com/showthread.php?t=28577)

SIGP2101 08-01-2012 03:08 PM

Quote:

Originally Posted by Shadowsix (Post 217671)

It may only be a .30 cal but I've come to respect the Tokarev round with it's 1645 fps 85 gr bullet!

:

... 7.62 is an excellent round, if we could only find accurate platform to shoot it from...well.:mad:

sheepherder 08-01-2012 06:38 PM

1 Attachment(s)
Quote:

Originally Posted by Shadowsix (Post 217671)
Actually mine actually doesn't have the safety issue most talk about but maybe it was from the amount of use it got before...

I did a bit of filing & stoning on the safety surfaces; also stoned the sear engagement surfaces. They were pretty rough...I have it functioning correctly now. Still has an awful trigger pull; I'll work on that next.

ETA: "Slick" posted the fix for the safety in this thread...

I punched out the magazine disconnect, I loathe those things. Pic attached if you feel the urge as well... :thumbup:

sheepherder 08-01-2012 09:58 PM

This is bizarre...
 
1 Attachment(s)
Check out this sight alignment... :rolleyes:

The top of the barrel at the muzzle is .175" below the top plane of the slide...The barrel hood [at breech] is .040" below the top plane of the slide...and the rear sight is .280" above the top plane of the slide... :eek:

That's some locking lug engagement!!! :D

I also measured the trigger pull with my spring gage...It was a bit over 9 #... :)

Shadowsix 08-02-2012 04:24 PM

Excellent work! Before you know you'll have it functioning better than the Soviets ever had!

Thank you for the info on the magazine disconnect. Next chance I get I will knock that out of there on mine!

sheepherder 08-08-2012 08:36 PM

Quote:

Originally Posted by Shadowsix (Post 217671)
Rich it looks in excellent shape. Maybe yours didn't go into service (or at least not for long) like mine must have.

If you want additional mags Wideners are selling factory made ones still sealed in oil for $25 each!

http://www.wideners.com/itemdetail.c...m_id=100000331

I had already ordered a pair of used magazines from AIM Surplus before you posted that...They came in today. Serviceable, and with a certain 'ambiance' that only well used magazines have... ;)

(Actually, one looks almost new and the other isn't all that bad...Plus they were cheaper...) :D


All times are GMT -4. The time now is 10:19 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com