7.63 Mauser (C96)

Steve Richards · 06-25-2002, 02:12 AM

Tom Heller has springs and I think bolt stops. He is listed on the Links & Resources of the Lugerforum.com homepage. I bought a broomhandle from him and he has (or at least had) ammo. Wolf springs also has spring sets. If the recoil and firing pin springs are shorter than the parts they slide over replace them!

I bought loading dies from Lee and use 6.0gr Unique and a Sierra 85gr #8005 soft round nose and everything seems to work fine. I bought the brass from Starline.

With all that I have read about Tokarev/Mauser ammo, I do not trust what I can buy!

Steve Richards

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-25-2002, 02:12 AM	#1
Steve Richards User Join Date: Jun 2002 Location: Beaverton, Oregon Posts: 487 Thanks: 0 Thanked 1 Time in 1 Post	Tom Heller has springs and I think bolt stops. He is listed on the Links & Resources of the Lugerforum.com homepage. I bought a broomhandle from him and he has (or at least had) ammo. Wolf springs also has spring sets. If the recoil and firing pin springs are shorter than the parts they slide over replace them! I bought loading dies from Lee and use 6.0gr Unique and a Sierra 85gr #8005 soft round nose and everything seems to work fine. I bought the brass from Starline. With all that I have read about Tokarev/Mauser ammo, I do not trust what I can buy! Steve Richards