Pastor Munkel Revisited

Lugerdoc · 12-08-2002, 07:01 AM

WARNING! To those of you planning to install 9x120mm barrels. Recently a couple of Forum members have sent me GPC 6" barrels to install in their PO8s which had front sight that were off-center by a few degrees from lining up with the extraction groove in the chamber. These are no good and I will not install them. I do have a few much better Mentor Arms made barrels available for $75 each. I also have in stock both of Fred Datig's Monographs (books) on the Swiss luger and German Military PO8s 1904-1930 @$15 each or both for $25. Hellerarms@webtv.net

12-08-2002, 07:01 AM	#1
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	WARNING! To those of you planning to install 9x120mm barrels. Recently a couple of Forum members have sent me GPC 6" barrels to install in their PO8s which had front sight that were off-center by a few degrees from lining up with the extraction groove in the chamber. These are no good and I will not install them. I do have a few much better Mentor Arms made barrels available for $75 each. I also have in stock both of Fred Datig's Monographs (books) on the Swiss luger and German Military PO8s 1904-1930 @$15 each or both for $25. Hellerarms@webtv.net __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode