black fxo magazine bases

Frank · 08-10-2002, 10:24 AM

Cory, if the magazine is marked "fxo", it also is marked P08 on the side, near the spine (or flat narrow side) close to the bottom. If the "8" in P08 is closest to the bottom, the bottom should be aluminum and marked with the pistol serial number. If the "P" is closest to the bottom, the bottom could be either aluminum or black plastic. Black plastic bottoms are not marked and the aluminum bottoms could be either marked or unmarked. [img]wink.gif[/img]

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

08-10-2002, 10:24 AM	#17
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 165 Times in 87 Posts	Cory, if the magazine is marked "fxo", it also is marked P08 on the side, near the spine (or flat narrow side) close to the bottom. If the "8" in P08 is closest to the bottom, the bottom should be aluminum and marked with the pistol serial number. If the "P" is closest to the bottom, the bottom could be either aluminum or black plastic. Black plastic bottoms are not marked and the aluminum bottoms could be either marked or unmarked. [img]wink.gif[/img]