LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Shooting and Reloading

Reply
 
Thread Tools Display Modes
Unread 12-04-2025, 10:06 AM   #1
velodog455~
User
 
Join Date: Aug 2023
Posts: 112
Thanks: 33
Thanked 110 Times in 61 Posts
Default

You can buy adhesive-backed weather strip tape that is about 3/16" thick, cut it to size, and affix it to your grip safety. I think that will add enough extra thickness that the grip safety will work as it should.

Removal is straight forward; just peel it off. Use Goo Gone to remove adhesive residue. It should not damage your finish.
-Bob
velodog455~ is offline   Reply With Quote
The following member says Thank You to velodog455~ for your post:
Unread 12-04-2025, 07:03 PM   #2
Deputywood
User
 
Join Date: Apr 2022
Posts: 78
Thanks: 83
Thanked 92 Times in 39 Posts
Default

I have to add some material to my grip safety on my 1911's that are equipped with beavertail safeties. With a high grip, I get the same pocket and cannot disengage the safety. Rem Oil or WD40 applied to the adhesive will dissolve it quickly and not harm your finish.

Woody
Deputywood is offline   Reply With Quote
The following member says Thank You to Deputywood for your post:
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:47 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Lugerforum.com