Extractor repair-conversion unit

lugerholsterrepair · 11-09-2020, 10:54 PM

I don't know but a WAG is that the bottom of the extractor has a hook that engages a lip in the slot where it inserts. It is then held in place by tension, being pushed forward by the extractor spring?

Doubs · 11-10-2020, 01:58 AM

Quote:

Originally Posted by lugerholsterrepair

I don't know but a WAG is that the bottom of the extractor has a hook that engages a lip in the slot where it inserts. It is then held in place by tension, being pushed forward by the extractor spring?

Vlim's IPB appears to agree with your assessment. The extractor appears to be designed to stay in place via spring pressure against a pin that seats against the extractor.

11-09-2020, 10:54 PM	#1
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,134 Times in 1,439 Posts	I don't know but a WAG is that the bottom of the extractor has a hook that engages a lip in the slot where it inserts. It is then held in place by tension, being pushed forward by the extractor spring? __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode