LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Shooting and Reloading

Reply
 
Thread Tools Display Modes
Old 04-30-2020, 10:36 PM   #1
Sieger
User
 
Sieger's Avatar
 
Join Date: Jul 2003
Location: New York, NY
Posts: 1,579
Thanks: 2,154
Thanked 402 Times in 251 Posts
Default

Quote:
Originally Posted by HerbZ View Post
Isn't our main concern with shooting a Luger, is that it functions properly, and without damaging the pistol. Then wouldn't the specification we should be most concerned with is muzzle energy? If the original German Army specs are a 123 gr bullet at 1,076 fps, that's 316 ft-lbs. May we assume that's a good solid amount of energy for safe and reliable functioning, and plenty enough "for war."

Then NATO spec 9mm of 124 gr at 1261 fps would have a muzzle energy of 438 ft-lbs. If I'm doing the math right, that's a 38.6% increase in muzzle energy. That can't be good for any Luger to run a couple of boxes through once in awhile.

So here's a real life problem. When Ohio's lockdown is over for sure, I've a nephew and some grands that want to shoot my byf 42. Everyone had already bought a box of 9mm at Cabela's. I certainly don't want to damage the P.08, but shooting underpowered ammo may cause malfunctions. There's a box of Sig; 115 gr FMJ, 1185 fps, 359 ft-lbs, another kind of Sig; 115 gr FMJ, 1050 fps, 282 ft-lbs, and a box of PPU; 115 gr FMJ, 990 fps, 250 ft-lbs.

I know we can't be absolutely certain of any of these specs, made in the USA or Serbia, but they're all I have to work with here. I'm thinking the hottest is too hot. Maybe the middle one is in the Goldilocks zone? Is the PPU ammo too underpowered?
Hi Herb,

The Sig and PPU specs. you have listed look funky to me.

Do you reload at all?

If not, The Fiocchi 123 Grain Combat round (truncated cone bullet almost an exact replica of DWM's original bullet) has worked perfectly in my BYF 41 AND is NOT overpowered!

Your grand kids may have to wait a little longer until CV 19 mess straightens up.

Good shooting!


Sieger
Sieger is offline   Reply With Quote
Old 05-01-2020, 05:15 PM   #2
HerbZ
User
 
HerbZ's Avatar
 
Join Date: Jun 2006
Location: Ohio
Posts: 128
Thanks: 20
Thanked 9 Times in 7 Posts
Default

Quote:
Originally Posted by Sieger View Post
Hi Herb,

The Sig and PPU specs. you have listed look funky to me.

Do you reload at all?

If not, The Fiocchi 123 Grain Combat round (truncated cone bullet almost an exact replica of DWM's original bullet) has worked perfectly in my BYF 41 AND is NOT overpowered!

Your grand kids may have to wait a little longer until CV 19 mess straightens up.

Good shooting!


Sieger
I'm not sure what you mean by funky in regards to the specs I gave for the two different Sig and one of PPU ammo.

I presume you don't mean funky, as in music, and the only other definitions I can think of are either, filthy or questionable.

The Sig specs are from right on their boxes. Like I wrote, they're all I have to work with, so I have to trust that they're reasonable guesstimates, and at least good enough for relative comparison. Certainly I should be able to trust that one box of Sig ammo is hot than the other. My question, still unanswered, is if the hotter one is too hot and the slower load not hot enough?

With the PPU ammo, the only spec given on the box is the bullet weight, 115 gr, the same as the two Sig loads. Different websites selling this ammo (when it's in stock) give different muzzle velocities. So using one of the many calculators on the Internet for calculating muzzle energy are going to give different ft-lbs depending on the muzzle velocity input. In that earlier posting I gave a low one compared to one I just now found for the exact same ammo. based on both the photo of the box and the UPC on the box.

PPU Handgun Line 9mm Luger FMJ 115gr, 1145fps, 335 ft-lbs.

Like I said, I feel I can take what printed on the Sig boxes as a good guesstimate. PPU is something else.
__________________
"I have never let my schooling interfere with my education." Mark Twain
HerbZ is offline   Reply With Quote
Unread 05-01-2020, 05:52 PM   #3
Sieger
User
 
Sieger's Avatar
 
Join Date: Jul 2003
Location: New York, NY
Posts: 1,579
Thanks: 2,154
Thanked 402 Times in 251 Posts
Default

Quote:
Originally Posted by HerbZ View Post
I'm not sure what you mean by funky in regards to the specs I gave for the two different Sig and one of PPU ammo.

I presume you don't mean funky, as in music, and the only other definitions I can think of are either, filthy or questionable.

The Sig specs are from right on their boxes. Like I wrote, they're all I have to work with, so I have to trust that they're reasonable guesstimates, and at least good enough for relative comparison. Certainly I should be able to trust that one box of Sig ammo is hot than the other. My question, still unanswered, is if the hotter one is too hot and the slower load not hot enough?

With the PPU ammo, the only spec given on the box is the bullet weight, 115 gr, the same as the two Sig loads. Different websites selling this ammo (when it's in stock) give different muzzle velocities. So using one of the many calculators on the Internet for calculating muzzle energy are going to give different ft-lbs depending on the muzzle velocity input. In that earlier posting I gave a low one compared to one I just now found for the exact same ammo. based on both the photo of the box and the UPC on the box.

PPU Handgun Line 9mm Luger FMJ 115gr, 1145fps, 335 ft-lbs.

Like I said, I feel I can take what printed on the Sig boxes as a good guesstimate. PPU is something else.
Herb,

I have listed the commercial ammo of my preference and knowledge of function.

Is Muzzle Energy really the determining factor, though, obviously, quite an important one?

Really, the only true test is to fire the lowest rated ammo and test it for jamming.

Use others at your own personal risk.


Sieger
Sieger is offline   Reply With Quote
The following member says Thank You to Sieger for your post:
Unread 05-01-2020, 07:49 PM   #4
HerbZ
User
 
HerbZ's Avatar
 
Join Date: Jun 2006
Location: Ohio
Posts: 128
Thanks: 20
Thanked 9 Times in 7 Posts
Default

I may be coming off like someone who's riding the line between cautious and stupid. I'm a learner and maybe this will be a teaching moment for other shooters too.

Just to review what I've learned, that others may want to know.

124 gr, 1261 fps, 438 ft-lbs. NATO plastic pistols,not old Lugers.

123 gr, 1076 fps, 316 ft-lbs. Original German Army P.08 specs.

123 gr, 1180 fps, 383 ft-lbs. Fiocchi FMJTCEB (truncated cone) closest store bought to original specs (presently unobtainable).

Of the three types of ammo (see my earlier post) picked out for me at Cabella's while Grandma and the other girls were shopping at Ikea, I think that the Sig 115 gr, 1185 fps, 359, may be the best performer.

A decade and a half or so ago, members of this forum were very big on the 100 round Winchester White Box from Walmart. It did seem pretty good ammo for awhile. Some time ago it became inconsistent.

Thanks to all, especially Seiger.
__________________
"I have never let my schooling interfere with my education." Mark Twain
HerbZ is offline   Reply With Quote
The following member says Thank You to HerbZ for your post:
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:54 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Lugerforum.com