![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
|
|
#1 |
|
Patron
LugerForum Patron Join Date: Mar 2011
Location: Az.
Posts: 2,316
Thanks: 2,768
Thanked 1,000 Times in 735 Posts
|
With a diameter of .306 compared to the correct diameter of .309in., I would be interested in the accuracy of this load. Many Lugers in 7.65Para caliber have very generous bores, and many, me included, have no problem using .310-.3115in. bullets with good accuracy.
__________________
Need DWM breechblock #21 |
|
|
|
| The following member says Thank You to rhuff for your post: |
|
|
#2 | |
|
User
Join Date: Mar 2019
Location: Wrong side of the Delaware river
Posts: 343
Thanks: 247
Thanked 493 Times in 194 Posts
|
Quote:
Results:- The Herco produced a 1.5 by 0.5 group with holes overlapping. This is 5 shot groups at 25 yards. One hand, freehand, so some attributable to my wobbliness But this is a 70's Mauser remake, not an early DMW |
|
|
|
|
| The following member says Thank You to Kiwi for your post: |
|
|
#3 |
|
Patron
LugerForum Patron Join Date: Mar 2011
Location: Az.
Posts: 2,316
Thanks: 2,768
Thanked 1,000 Times in 735 Posts
|
Thanks for the info. My post-war Mausers all have nice tight bores, compared to my early(pre-war/wartime) Lugers. I have two(2) Bar-Sto custom barrels in 7.65Para, and the chambers and bores are minimal in diameter. I attempted to shoot some of the .310-.311in. lead bullets through these barrels, and had a real mess with heavy leading of the barrels. They get ONLY FMJ bullets of the correct diameter shot down them these days. I was fortunate to acquire a fair amount of the Swiss 92gr .309 FMJ bullets from GT, and they work great.
__________________
Need DWM breechblock #21 |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|