LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Luger Discussion Forums > All P-08 Military Lugers

Reply
 
Thread Tools Display Modes
Unread 02-26-2020, 08:21 PM   #1
G.T.
Lifer
Lifetime Forum
Patron
 
Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,550
Thanks: 1,361
Thanked 3,779 Times in 1,028 Posts
Default looks nice!

To start with, congrats on your new acquisition, you'll learn more with this Lugers than any that follow... But, to the problems at hand... remove the RH grip, you should be able to actuate the hold open while holding toggle back? It's tricky, but after a little effort you'll get it... Once the toggle is locked back / open, (only way it, the take down lever, can be moved!!!) you should be able to swing the take down lever down 90 degrees to allow removal of the side plate, and, also the receiver after pulling back all the way on the toggle, to let the hold open fall down and release... If you get that far, we will re-visit and discuss the next move, moves.... best to you, til...lat'r...GT...
G.T. is offline   Reply With Quote
The following 4 members says Thank You to G.T. for your post:
Unread 02-27-2020, 11:09 PM   #2
runscott
User
 
Join Date: Feb 2020
Posts: 36
Thanks: 10
Thanked 45 Times in 12 Posts
Default

Quote:
Originally Posted by G.T. View Post
...you should be able to actuate the hold open while holding toggle back? It's tricky, but after a little effort you'll get it... Once the toggle is locked back / open, (only way it, the take down lever, can be moved!!!)
I don't know what you mean by "actuate the hold open" and when I google it, I just see instructions that say the same, without defining what "actuate the hold open" actually means.

update - if I use a screwdriver wrapped in cloth, I can get the take-down lever to go down. I'll just put it away and wait for the new magazine to arrive. If that doesn't solve the problem Ill punt. I apologize for bothering you all so much about this, and I appreciate all the information you have provided. If this one isn't workable, I'll certainly have a head-start with the next one. I've probably put about ten hours of work in on it since it arrived yesterday.
runscott is offline   Reply With Quote
Unread 02-28-2020, 02:42 AM   #3
Doubs
User
 
Doubs's Avatar
 
Join Date: Jun 2002
Location: Byron, Georgia
Posts: 1,753
Thanks: 849
Thanked 1,827 Times in 601 Posts
Default

Quote:
Originally Posted by runscott View Post
I don't know what you mean by "actuate the hold open" and when I google it, I just see instructions that say the same, without defining what "actuate the hold open" actually means.
With an empty magazine in the pistol, the follower button on the right side should push up against the hold open. When the action is pulled fully to the rear, the button pushes the hold open upward and prevents the action from closing; i.e., the breech block is caught by the hold open and is locked open Your magazine may have a weak spring and not work the hold open. A new MecGar mag should resolve that if it's truly a problem.

My father used to hold the action open with one hand and reach into the receiver with the other and pull the hold open into position to lock the action open. I saw him do that many times.

As HerrKaiser says, some take down levers are really difficult. A little oil on it might help.
Doubs is offline   Reply With Quote
Unread 02-28-2020, 01:18 PM   #4
runscott
User
 
Join Date: Feb 2020
Posts: 36
Thanks: 10
Thanked 45 Times in 12 Posts
Default

Quote:
Originally Posted by HerrKaiser View Post
Some advice, put some lubricating oil (I use remoil) on the sideplate area where the TD lever engages it. You may also check the inside of the frame and lube up the lever itself inside the frame to see if that helps at all.
Will do both when I break down and clean today.

Quote:
Originally Posted by Doubs View Post
With an empty magazine in the pistol, the follower button on the right side should push up against the hold open. When the action is pulled fully to the rear, the button pushes the hold open upward and prevents the action from closing; i.e., the breech block is caught by the hold open and is locked open Your magazine may have a weak spring and not work the hold open. A new MecGar mag should resolve that if it's truly a problem.

My father used to hold the action open with one hand and reach into the receiver with the other and pull the hold open into position to lock the action open. I saw him do that many times.

As HerrKaiser says, some take down levers are really difficult. A little oil on it might help.
I see what you are saying. The follower button doesn't move when I pull the action back. I'm not gutsy enough yet to put my fingers in there - I'll just wait for the new mec-gar and see if that fixes the issue. I don't have any other mags with follower buttons, so it's tough to judge the spring strength, but it seems a little weak to me.

Thanks all.
runscott is offline   Reply With Quote
Unread 02-28-2020, 03:59 PM   #5
runscott
User
 
Join Date: Feb 2020
Posts: 36
Thanks: 10
Thanked 45 Times in 12 Posts
Default

I don't see the post anymore, but someone had asked about the sideplate. Sadly, it is blank.
runscott is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:53 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Lugerforum.com