![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
|
|
#1 |
|
User
Join Date: Aug 2018
Posts: 25
Thanks: 0
Thanked 12 Times in 6 Posts
|
I've trimmed cases before, but may have a case or thirty that's been reloaded three times since trimming.
I'm in no hurry, so will measure OAL after the next sizing. |
|
|
|
|
|
#2 |
|
Patron
LugerForum Patron Join Date: Mar 2011
Location: Az.
Posts: 2,316
Thanks: 2,768
Thanked 1,000 Times in 735 Posts
|
I have been loading 30 Luger brass for many, many years, and have never found a need to trim any of my brass. Some of my brass has been reloaded 10-15 times, or more. Something else is wrong in my way of thinking. Are you getting bullet setback?
__________________
Need DWM breechblock #21 |
|
|
|
| The following member says Thank You to rhuff for your post: |
|
|
#3 | |
|
User
Join Date: Jun 2002
Location: Byron, Georgia
Posts: 1,753
Thanks: 849
Thanked 1,827 Times in 601 Posts
|
Quote:
I have also been reloading .30 Luger for about 50 years and while the short neck is not ideal, it's still not hard to do. IF your bullet diameter is too large, trying to seat it in a neck that is too tight may cause the shoulder to collapse. The answer is to either bevel or expand the case mouth to start the bullet. Neck tension is critical to prevent bullet setback as the cartridges feed into the chamber. Depending upon the bullet used, a crimp may be - and often is - necessary. WRT trimming the cases, I almost never do as I've found it to be unnecessary. |
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|