![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
|
|
#1 |
|
User
Join Date: Mar 2013
Posts: 53
Thanks: 108
Thanked 61 Times in 19 Posts
|
Sieger,
I went out this morning and shot my 7.65 with 5 grains of Winchester WSF, an OAL of 1.158" and it came off without a hitch. Although I need to work on my trigger control, the gun seems to shoot well, and is very flat shooting. Do you have any idea what powder DWM used in the 1920's? |
|
|
|
|
|
#2 | |
|
User
Join Date: Jul 2003
Location: New York, NY
Posts: 1,579
Thanks: 2,154
Thanked 402 Times in 251 Posts
|
Quote:
DWM's powder is years out of production, but they used the exact same load, 5.4 grains, in both the 9mm and 7.65mm. Medium/slow powders, in the Luger, have always given me trustworthy accuracy and top performance. In fact, my most accurate loads, with the 9mm 124 grainers, with Power Pistol, AA5, SR 4756 and others have all been in the 5.1 to 5.5 grain range. These modern powders are all in the medium/slow burning range, by the way. Again, WSF should be an excellent powder choice in the 7.65mm. It sounds like that O.A.L. has been properly determined, too! Are there any pressure signs on those necks using a .312 bullet in a .311 barrel? My 7.65s have worked just great with them. How is your accuracy? Good shooting, Sieger |
|
|
|
|
| The following member says Thank You to Sieger for your post: |
![]() |
| Thread Tools | |
| Display Modes | |
|
|