..new arrival..

DavidJayUden · 03-22-2018, 06:15 PM

It's a work of art.
dju

Rick W. · 03-22-2018, 06:36 PM

You could have done worse..........

I would think you are pleased as punch.........I would be too.

That pistol type is in my opinion the ultimate Luger, guess the barrel taper gets me every time............and.......... it is a 30......fast little devil that it is.

I finally acquired one like you pictured, but not as pristine. It functions like it should and shoots right to the point of aim with my handloads. A real delight, wonder why I waited so long to acquire one.

I have had most barrel types,lengths; either factory or me making them; but the 4 3/4........is tops in my book.

JTD · 03-22-2018, 06:42 PM

In my opinion, the 06 is a very classy looking luger. Thanks for sharing it with us. Does it fit in the holster well with the .30 thin 4 3/4" barrel? John

Whisky · 03-23-2018, 06:29 AM

Quote:

Originally Posted by JTD

.. Does it fit in the holster well with the .30 thin 4 3/4" barrel?

It fits the holster very well - but (with my way of thinking) I've kept it "out" of the holster - so as to protect the finish from holster rub (I've been doing a Field Strip a couple of times each day - just to "learn")

it, the magazine and the holster being kept apart from one another in a foam lined hard case at present

the pistol thanks you for the kind comments (as do I)

JTD · 03-23-2018, 07:28 AM

When you get a chance, how about some detail photos of the holster. To fit a 4 3/4" barrel, this holster my also be very unusual. They almost fit good in a 4" holster. For the heck of it, take out the mag, look in the bottom rear of the mag well and look for a "P" or "Pvt" stamp. Long shot, but curious. John

Whisky · 03-23-2018, 08:05 AM

Quote:

Originally Posted by JTD

When you get a chance, how about some detail photos of the holster. To fit a 4 3/4" barrel, this holster my also be very unusual. They almost fit good in a 4" holster. For the heck of it, take out the mag, look in the bottom rear of the mag well and look for a "P" or "Pvt" stamp. Long shot, but curious. John

check this Legacy advert link - the pics I've posted are from their site - the 2 dedicated holster pics are better than I'm able to furnish.....(will check the mag well later)

https://www.legacy-collectibles.com/...er-030618.html

Later : I see no "P" nor "Pvt" stamp in the bottom rear of the mag well

rhuff · 03-23-2018, 01:47 PM

That is one handsome Luger for sure. Congrats!!

03-23-2018, 01:47 PM	#7
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,315 Thanks: 2,751 Thanked 999 Times in 734 Posts	That is one handsome Luger for sure. Congrats!! __________________ Need DWM breechblock #21

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-22-2018, 06:15 PM	#1
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	It's a work of art. dju

03-22-2018, 06:36 PM	#2
Rick W. User Join Date: Jun 2002 Posts: 339 Thanks: 81 Thanked 359 Times in 198 Posts	You could have done worse.......... I would think you are pleased as punch.........I would be too. That pistol type is in my opinion the ultimate Luger, guess the barrel taper gets me every time............and.......... it is a 30......fast little devil that it is. I finally acquired one like you pictured, but not as pristine. It functions like it should and shoots right to the point of aim with my handloads. A real delight, wonder why I waited so long to acquire one. I have had most barrel types,lengths; either factory or me making them; but the 4 3/4........is tops in my book.

03-22-2018, 06:42 PM	#3
JTD User Join Date: Feb 2005 Location: PA Posts: 428 Thanks: 218 Thanked 410 Times in 151 Posts	In my opinion, the 06 is a very classy looking luger. Thanks for sharing it with us. Does it fit in the holster well with the .30 thin 4 3/4" barrel? John

03-23-2018, 07:28 AM	#5
JTD User Join Date: Feb 2005 Location: PA Posts: 428 Thanks: 218 Thanked 410 Times in 151 Posts	When you get a chance, how about some detail photos of the holster. To fit a 4 3/4" barrel, this holster my also be very unusual. They almost fit good in a 4" holster. For the heck of it, take out the mag, look in the bottom rear of the mag well and look for a "P" or "Pvt" stamp. Long shot, but curious. John