P04 help please:

kurusu · 08-27-2017, 05:30 PM

That second right side is better. But the tip of the ejector should be rounded not square. It appears a triffle too short also. The magazine release also needs improvement

On the group image there's a wavy look on what should be a flat surface. And, with the action close, the ejector is also flat with that flat surface. The front tip only goes in with the action open.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-27-2017, 05:30 PM	#1
kurusu User Join Date: Sep 2007 Posts: 1,225 Thanks: 2,679 Thanked 930 Times in 509 Posts	That second right side is better. But the tip of the ejector should be rounded not square. It appears a triffle too short also. The magazine release also needs improvement On the group image there's a wavy look on what should be a flat surface. And, with the action close, the ejector is also flat with that flat surface. The front tip only goes in with the action open.