New to Lugers, may have a DWM on my hands?

[Mac Cat]

Good start on the photos !
Photograph the top and back of the toggle and chamber!

[DonVoigt]

Originally Posted by Mac Cat

Good start on the photos !
Photograph the top and back of the toggle and chamber!

And please post them on the server here.
One can't enlarge the photos posted on what ever host server you are using.

And eventually the picture links will disappear and this thread will be meaningless.

[09cs]

Originally Posted by mrerick

There are a number of questions I'd have about this Luger.

The crowns stamped on the frame and barrel don't look like what you'd find on a DWM Alphabet Commercial (which I think was Ed's assumption). Usually there is a suffix letter there, not a crown stamp.

The side plate profile looks unusual,

Please photograph the entire pistol left and right, the muzzle from the front and the top toggle train areas.

Is there a marking near your thumb in the last photo?

Is the receiver slightly proud (in front of) the frame in the front of the pistol near the serial number?

Marc

Do you mind elaborating on the bold parts of the quote? Not exactly sure what they are/mean.

Originally Posted by Mac Cat

Good start on the photos !
Photograph the top and back of the toggle and chamber!

I will try to get the chamber, is there a way to get the slide, or toggle (not sure the correct term for a Luger) to lock back without a magazine?

Originally Posted by DonVoigt

And please post them on the server here.
One can't enlarge the photos posted on what ever host server you are using.

And eventually the picture links will disappear and this thread will be meaningless.

Will do! Was unaware of that