LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Shooting and Reloading

Reply
 
Thread Tools Display Modes
Unread 08-06-2017, 10:11 AM   #1
Major Tom
User
 
Major Tom's Avatar
 
Join Date: Jan 2017
Location: S.E. Iowa
Posts: 484
Thanks: 533
Thanked 229 Times in 125 Posts
Default

I have found that Hornady makes a .309 pistol bullet. MidwayUSA carries them in stock.
__________________
I Build Custom Pistol Boxes
Major Tom is offline   Reply With Quote
Unread 08-06-2017, 12:33 PM   #2
Rick W.
User
 
Join Date: Jun 2002
Posts: 339
Thanks: 81
Thanked 359 Times in 198 Posts
Default

Hugh's generous writeup has been a source of info for quite a while here. As in most things, starting low in a particular weapon can be a good thing, as he alluded to. I think loads are always a reference, not an absolute as the particular environment varies per shooter and his stuff.

I have used the 308-309 jacketed bullets(Sierra, Hornady, etc) in most of my original 30 Luger chambered Lugers. Seem to be good bullets, a bit expensive for some shooting, but glad they are available really.

European, Winchester, and Starline brass is available. If you form 30 Luger from a parent brass, one might pay attention to the total loaded neck diameter. Tis nice to be able to let go of the bullet.

One might notice, there are a lot of 312 bullets around, sometimes at cheap rates in quantity, or for a specialized purpose, like speed. Resizing with a inexpensive Lee sizing die, can take the 312's down to 309 in one stroke of the press. I use a rockchucker for such. I always thought that Lee bullet sizing dies were only for lead, but as time went on, and I read/learned, the jacketed bullets can be done the same way. I am pondering doing the same thing with a 224 bullet downsized for the 22Jet, 22 squirrel, and 224 harvey kay-chuk on Smith K frames.

All of my local ranges have banned lead bullets, sure were nice to use when I could shoot them here..........accurate and cheap to cast.

On a lark, I bought 1100x of the plated 308 size, 110gr plated bullets for the M1 30 carbine......intending use in a 30 wildcat that I shoot in the Lugers. I have shot this heavy a bullet before in 30 cal Lugers, just have to adjust your load. Some may think a bit heavy for the Luger, but to each their own and ponder the pros/cons.

I have rebarreled almost all of my original 30 Luger pistols to redone 30-06 barrels( 4 3/4 t0 14"), which have the 308" bore type, so 308-309 bullets are more better in my particular case. After shooting the home brew barrels, I will never go back to the original barrels, just right happy as to function/looks with the custom barrels now. A 10" scoped Luger in the 7.65x19 wildcat has become a favorite.

Slugging your Luger barrel will give clues on what is, and what is not.

The hunt for components/knowledge thereof, is worth it; once you start shooting the 30's. Guess it is kinda the need for speed.
Rick W. is offline   Reply With Quote
The following 5 members says Thank You to Rick W. for your post:
Unread 09-03-2018, 01:26 PM   #3
Rickybill
User
 
Rickybill's Avatar
 
Join Date: Aug 2018
Posts: 25
Thanks: 0
Thanked 12 Times in 6 Posts
Default

I'm a fan of resized .311"-.312" bullets.
The Hornady 85gr XTP has the crimp groove in the right place.
Probably too expensive for extensive shooting, but I shoot only about 100 rounds a year, so case prep time/effort is a much larger concern than bullet cost.
Rickybill is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:40 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Lugerforum.com