Sear plunger pin and S-link pin removal

[DonVoigt]

Originally Posted by sheepherder

... ... Funny! (Yeah; like that never happened to me!)

On my two Lugers with suspect sear plungers, both had pins that tapped right out, no pressure needed. IIRC, I used a brad and a tiny hammer.

I'm still looking for the gear, I've now convinced myself that the cat got it to play with or else it was never shipped!

Those little pins will come out with a small(regular size) old fashioned paper clip- easily- or else they don't want to come out at all!
I've also used a "push pin" with the point filed flat- again, works like a charm if the pin co-operates.

The hook pin- better make a starte rpunch and a fixture to hold the piece, if they don't move easily.