![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
|
|
#1 | |
|
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,683
Thanks: 1,444
Thanked 4,358 Times in 2,042 Posts
|
Quote:
the spring is what pushes the retainer to the rear, without it it would not lock in, any "extra" pressure =more wear. I never said it was the only factor, only that the spring is much stronger than needed and a big factor in this type of wear, IMO. Lubrication is always good; and yes, in "normal" operation the guide should not contact the rear of the frame. It would take a Lot of shooting and/or firing higher power loads to do this. It is not a really common failure, again JMHO.
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
|
|
|
|
|
|
#2 |
|
User
Join Date: Aug 2018
Posts: 25
Thanks: 0
Thanked 12 Times in 6 Posts
|
I had my local gunsmithing services provider perform this repair to my breechblock.
The repair pin occupies space within the breechblock that needs to be free for rearward movement of the retainer, so I reduced the retainer locking tab's thickness until the toggle would lock and striker would drop. I popped a primed case to prove trigger/striker function, and will try to get to the range for a full test, and some pics. |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|