LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Luger Discussion Forums > Unit Markings

Reply
 
Thread Tools Display Modes
Unread 04-26-2016, 12:29 PM   #1
Ron Wood
Moderator
2010 LugerForum
Patron
 
Ron Wood's Avatar
 
Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,057
Thanks: 1,131
Thanked 5,302 Times in 1,733 Posts
Default

It is a bit difficult to tell for sure but I think the holster may be a converted LP08 holster. There appears to be evidence that a stock attachment block was removed from between the belt loops. Is there a double row of stitching holes down the front of the holster where a cleaning rod sheath was removed? If it is indeed a converted arty holster, probably the closure strap is original and only the stud needed to be added. Also, the marking on the back is not a Crown Anchor but rather a Crown/I (First Bavarian Corp).
Ron
__________________
If it's made after 1918...it's a reproduction
Ron Wood is offline   Reply With Quote
Unread 04-26-2016, 03:24 PM   #2
Don M
Patron
LugerForum
Patron
 
Don M's Avatar
 
Join Date: Aug 2004
Location: Houston, TX
Posts: 1,429
Thanks: 67
Thanked 292 Times in 191 Posts
Default

Quote:
Originally Posted by Ron Wood View Post
It is a bit difficult to tell for sure but I think the holster may be a converted LP08 holster. There appears to be evidence that a stock attachment block was removed from between the belt loops.
I agree with Ron. Also, there is no evidence on the front that there ever was a diagonal closure strap and buckle attached.
__________________
Regards,
Don
donmaus1@aol.com

Author of History Writ in Steel: German Police Markings 1900-1936
http://www.historywritinsteel.com
Don M is offline   Reply With Quote
Unread 05-01-2016, 06:11 PM   #3
bruce4guns
User
 
Join Date: Apr 2016
Posts: 8
Thanks: 0
Thanked 1 Time in 1 Post
Default

Thanks. Yes there is a double row of stitching on the front flap. The holster was made by Hans Romer Neu-Ulm and is dated 1918 Definitively not a reproduction. The marking on the back is as you say probably a Crown I. The back of the holster is serialized 213 (the same as the gun).
I cannot thank all those who have participated enough. I now know I have an entirely matching serial number police P.08 Obviously issued from commercial guns in 1920 (crown N only proof mark).
Two matching clips (numbered 1 &2) matching take down tool an matching holster.
I can only assume that the gun was used during WW2 by the police units attached to the army perhaps in conquered territory. For a guy with my heritage not a pretty picture, but history all the same.
Thanks to all again.
Bruce Cohen
bruce4guns is offline   Reply With Quote
The following member says Thank You to bruce4guns for your post:
Unread 05-02-2016, 12:51 PM   #4
Don M
Patron
LugerForum
Patron
 
Don M's Avatar
 
Join Date: Aug 2004
Location: Houston, TX
Posts: 1,429
Thanks: 67
Thanked 292 Times in 191 Posts
Default

Quote:
Originally Posted by bruce4guns View Post
I can only assume that the gun was used during WW2 by the police units attached to the army perhaps in conquered territory. For a guy with my heritage not a pretty picture, but history all the same.
Bruce, there is no reason to assume that this rig belonged to one of the police battalions deployed to occupied countries. In fact, the existence of a Schiwy safety strongly suggests that the rig remained with the municipal police throughout WWII.
__________________
Regards,
Don
donmaus1@aol.com

Author of History Writ in Steel: German Police Markings 1900-1936
http://www.historywritinsteel.com
Don M is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:57 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Lugerforum.com