![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
|
|
#1 | |
|
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,208
Thanks: 1,425
Thanked 4,474 Times in 2,343 Posts
|
Quote:
__________________
I like my coffee the way I like my women... ...Cold and bitter...
|
|
|
|
|
|
|
#2 |
|
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,550
Thanks: 1,361
Thanked 3,779 Times in 1,028 Posts
|
Hi Don, Thanks for the picture on the fabrication sequence... annnnd, it is pretty much just what I said?? ....
......Except.. I would still have to believe the magazine was milled when the blank was flat as I surmised, rather then formed, welded and then machined?.... From a manufacturing standpoint, it is a lot easier to control tolerances on a flat surface then on a thin radius... I wish I had a 105 year old German machinist to ask?.... ... best to all, til...lat'r....GTBTW, 16 rounds is the very outside max you could ever go on a straight Luger magazine, 15 would even be more reliable?... ... even the drums start to curve at round number 13 to 15...... Don't ask me how I know, but ... I do....
|
|
|
|
| The following 2 members says Thank You to G.T. for your post: |
|
|
#3 | |
|
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,683
Thanks: 1,444
Thanked 4,358 Times in 2,042 Posts
|
Quote:
You would just likely surmise wrong. When you read the discussion and information, it is related by a guy who what there, you will be convinced. ![]() Can you imagine machining first, and then trying to "bend" around the mandrel to a close tolerance? I can't. I can easily imagine the use of shaped miling cutters for each side; milling the the width of a side; the back and/or the curve of the front by milling or grinding.
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
|
|
|
|
| The following member says Thank You to DonVoigt for your post: |
|
|
#4 | |
|
Twice a Lifer
Lifetime Forum Patron Join Date: Mar 2011
Location: Atop the highest hill in Schuyler County NY
Posts: 3,419
Thanks: 7,605
Thanked 2,672 Times in 1,403 Posts
|
Quote:
__________________
"... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894 |
|
|
|
|
| The following member says Thank You to ithacaartist for your post: |
|
|
#5 |
|
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,550
Thanks: 1,361
Thanked 3,779 Times in 1,028 Posts
|
Hi Don, The book may very well be correct? But also, the guy who was there, source... maybe wasn't the guy who did the work, because... if you really think about it? It would be super easy to clamp the flat (on the thicker feed lips, pre-formed!) and machine every vertical dimension with a horizontal mill! They could down mill all in one shot!
And then as a result, die form the now thinner , and also edge indexed flat? It would actually improve forming and bending to 100% accuracy, which would aid and allow the then 100% aligned back spine joint, which it must have been to get the quality weld they achieved........ ... In this case, I'm not in agreement with the book, (any book!) but, we can agree to disagree until we gear up to make some! ... We will find out soon enough when we get to that point! Either way, you can't get anyone to remake the mag shells using the original technique?... I've tried... Now for the curve ball, It is possible to grind the mag shells into final dimension, but they would be better finished many times over just on the reduction to dimension... Think about it, you can do it in one shot, Or, you can re-chuck and re cut as many as five or six times to machine into tolerance... Although, I must submit, they were German! And as such, no amount of machine operations were out of bounds..... ... best to all, til...lat'r....GT....![]() BTW, David, they were most definitely die formed no matter what the sequence... every one perfectly formed to with in probably .003" max!!! BTW squared, you might be right on the forging? I never got past that point, but the East German mags were sub quality when compared to the war time items??... Lots more to learn! |
|
|
|
| The following 3 members says Thank You to G.T. for your post: |
![]() |
| Tags |
| haenel, luger magazine. |
| Thread Tools | |
| Display Modes | |
|
|