Artillery Luger Cleaning Rod Disassembly

lugerholsterrepair · 04-03-2016, 03:29 PM

Dog, There is no real way without drilling out the peened over top. Then you have the re assembly by peening on the new rod. Only guy I know who has real experience with this is Neil Young.

Norme · 04-03-2016, 04:48 PM

Quote:

Originally Posted by Daddydogg

How do you disassemble an Artillery Luger wooden handle cleaning rod?

I have an Artillery cleaning rod with a nice handle but a broken steel rod. I would like to salvage the handle and replace the rod. Anyone have any experience on how to do this without damaging the handle? Thanks for any suggestions.

Daddydogg

Hi Joseph, I shouldn't really be suggesting this, but if your rod is broken off near the tip it would be far simpler to convert it to a Navy rod.
Regards, Norm

04-03-2016, 03:29 PM	#1
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,134 Times in 1,439 Posts	Dog, There is no real way without drilling out the peened over top. Then you have the re assembly by peening on the new rod. Only guy I know who has real experience with this is Neil Young. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode