Help, I broke my broom...

alvin · 09-15-2015, 08:24 PM

Olle answered the question. Take the sight leaf off the gun, remove the sight slide, install a new button and a new button spring, put the slide back on leaf, put the leaf back on the gun.

Need to find a good button and a tiny button spring.

===

[Edit] I fired a dozen or so Broomhandles, the only one had small parts broken in the process was a Red 9. The safety lever front end flat spring was shaken broken. I did not even touch the safety, and it's broken. All other pistols had no issue. Even 1897 grandpa C96 was fine. But Red 9 was exception.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

09-15-2015, 08:24 PM	#8
alvin User Join Date: Jul 2007 Location: US Posts: 3,843 Thanks: 132 Thanked 729 Times in 438 Posts	Olle answered the question. Take the sight leaf off the gun, remove the sight slide, install a new button and a new button spring, put the slide back on leaf, put the leaf back on the gun. Need to find a good button and a tiny button spring. === [Edit] I fired a dozen or so Broomhandles, the only one had small parts broken in the process was a Red 9. The safety lever front end flat spring was shaken broken. I did not even touch the safety, and it's broken. All other pistols had no issue. Even 1897 grandpa C96 was fine. But Red 9 was exception.