1942 Luger (Issue #2)

dacotua · 08-03-2015, 01:06 PM

Winchester 115gr and 124gr. Both do the same

Zorba · 08-03-2015, 03:42 PM

Another thing to try is removing the extractor, and cleaning/oiling everything in that area really well. That fixed a similar issue I was having with my Nambu.

rhuff · 08-04-2015, 03:10 PM

Another place to look is the breechface. Be sure that there is no buildup of crud(scientific term) where the casehead fits into the breechface. I had a buildup in that area that caused a problem. It doesn't take a lot to be problematic. Remove the firing pin and spring, then place a cartridge into the breechface and see if the extractor is holding it firmly in place.....it should if everything is correct.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-03-2015, 01:06 PM	#1
dacotua User Join Date: Jul 2015 Posts: 12 Thanks: 0 Thanked 3 Times in 2 Posts	Winchester 115gr and 124gr. Both do the same

08-03-2015, 03:42 PM	#2
Zorba User Join Date: Feb 2013 Location: Merritt Island, Fl Posts: 952 Thanks: 777 Thanked 528 Times in 290 Posts	Another thing to try is removing the extractor, and cleaning/oiling everything in that area really well. That fixed a similar issue I was having with my Nambu.

08-04-2015, 03:10 PM	#3
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,315 Thanks: 2,753 Thanked 999 Times in 734 Posts	Another place to look is the breechface. Be sure that there is no buildup of crud(scientific term) where the casehead fits into the breechface. I had a buildup in that area that caused a problem. It doesn't take a lot to be problematic. Remove the firing pin and spring, then place a cartridge into the breechface and see if the extractor is holding it firmly in place.....it should if everything is correct.