upload photo | donate | calendar
|
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
04-11-2015, 10:39 PM
|
#1 |
|
Moderator
Lifetime LugerForum Patron 
Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,991 Times in 1,205 Posts
|
Looking at the photo above, the rear toggle pin (in the toggle knob) has moved outwards. It should go further in, normally it is held in place by a small retaining pin from the top. Judging from the state of the pistol, that retaining pin is probably no longer there.
|
|
|
|
04-12-2015, 04:42 AM
|
#2 |
|
New User
Join Date: Apr 2015
Location: Slovakia
Posts: 4
Thanks: 0
Thanked 1 Time in 1 Post
|
Few more photos... still cant figure it out
 The gun was in working condition before I tried to disassembled it. I did disassemble only the top part - to the point where I took the striker out and reassebled it. I did not took apart the handle. As you can see.. it does not fit already when the top part - barrel-toggle - is separated.  https://dl.dropboxusercontent.com/u/...412_103024.jpg https://dl.dropboxusercontent.com/u/...412_103350.jpg https://dl.dropboxusercontent.com/u/...412_103416.jpg https://dl.dropboxusercontent.com/u/...412_103440.jpg |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
