First Post, and an Open Ended Question

Diver6106 · 04-06-2015, 04:07 PM

The suppressor could be quickly put on and taken off with this design. It could have a spring latch on the back that locks down in the smooth parts so it would not back off or a one that catches the front ear to keep it on, or any other design. We need to see what goes on the threads! I think the end of the barrel needs careful examination to see it was machined with the threaded section and not added later, although either way, it could be original.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-06-2015, 04:07 PM	#1
Diver6106 User Join Date: Sep 2014 Location: Mt. Vernon VA Posts: 246 Thanks: 1,436 Thanked 119 Times in 76 Posts	The suppressor could be quickly put on and taken off with this design. It could have a spring latch on the back that locks down in the smooth parts so it would not back off or a one that catches the front ear to keep it on, or any other design. We need to see what goes on the threads! I think the end of the barrel needs careful examination to see it was machined with the threaded section and not added later, although either way, it could be original.