Luger Doubling

[JohnW...ski]

Originally Posted by Lugerdoc

John, Most likely your FP to sear overlap is too small or your flat sear spring is too weak. I would try replacing the spring first @$15 to see if that cures your problem. If not, I do have most other NOS Mauser Parabellum parts available. TH

Thanks for the reply. I have just gotten back from the range after firing 100 rounds of Winchester 115 gr. FMJ ammo. Other
than a couple of stove pipes the pistol functioned flawlessly.

A friend gave me a couple of boxes of generic 9 mm. before I received the pistol and those were the first I had used in it also with no problems.

It appears the problem is with my reloads, cast bullet from a 122 gr. round nose Saeco mold over 3.5 gr Bullseye and a CCI small pistol primer. Not a hot load by any means but seems to have something to do with the problem.

John