![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
|
|
#1 |
|
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,157
Thanks: 3,003
Thanked 2,311 Times in 1,099 Posts
|
Certainly an interesting discovery Rich, at least for tinkerers of the C96 model.
The only issue I see with using these for an Artillery Luger barrel project is the OEM sight for the Artillery Model when elevated moves the rear sight UP and to the LEFT at the same time, to compensate for muzzle whip and rifling affect on the bullets. These sights would only go UP when elevated, unless I am mistaken... Could they be modified to function similar to a genuine Luger artillery rear sight?
__________________
regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..." |
|
|
|
|
|
#2 | |
|
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,208
Thanks: 1,425
Thanked 4,474 Times in 2,343 Posts
|
Quote:
This Mauser rifle sight is not a replacement for the Luger artillery rear sight. It could possibly be shortened and a custom-machined & dovetailed base be made for it (like below) but the short answer is that as is it won't 'spiral up' when elevated. It won't fit the Luger sight base either, without a lot of milling. Here's a comparison pic - The left sight is a Sarco repro artillery rear sight on a Sarco repro artillery barrel; middle sight is a shortened FN M24/30 Carbine rear sight on a home-build [integral base] artillery barrel; right sight is the Chilean 1895 Short Rifle sight I just got in. Now...If you shortened an FN M24/30 sight 'ladder' (I don't know the name for the graduated part) you could cross-drill it at an angle to mimic the Luger 'spiral up' action...You'd have to drill the base to match. The Mauser sight 'ladders' are wider than the Luger base so a custom base would be necessary. That base could be milled & dovetailed to sit in the Luger artillery dovetail with the sight sitting on top of the Luger dovetail. Your front sight blade would need to be higher too. So...It's possible. Lots of variations could be done. But it's a lot simpler to just pop it on a C96 to replace a stripped Mauser sight ladder. (It's dimensionally the same). Cheaper too.
__________________
I like my coffee the way I like my women... ...Cold and bitter...
Last edited by sheepherder; 08-11-2014 at 07:11 PM. |
|
|
|
|
![]() |
| Tags |
| blivet |
| Thread Tools | |
| Display Modes | |
|
|