![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
|
|
#1 |
|
Patron
LugerForum Patron Join Date: Nov 2008
Posts: 4,047
Thanks: 578
Thanked 1,414 Times in 887 Posts
|
I too suspect that the problem lies at the muzzle. Sometimes when guns are vigorously cleaned from the muzzle end with a steel rod we see accuracy suffer dramatically, like this. Check for wear (or other defects) near the muzzle, try diff. ammo. with different bullet weights, cast and jacketed. etc. Clean the barrel and shoot it until dirty.
Options iniclude re-barreling, or relining the existing barrel, a service offerred by the Broom Closet in Florida. I suppose a guy could try counter-boring the muzzle a half-inch or so IF you have a lathe. Or sell it off and pick up another. dju |
|
|
|
|
|
#2 |
|
Patron
LugerForum Patron Join Date: Mar 2011
Location: Az.
Posts: 2,316
Thanks: 2,768
Thanked 1,000 Times in 735 Posts
|
This may be a long shot, but worth mentioning. Was your target backed up with a firm backing like cardboard, etc.? If the target was made of thin paper, and without backup, it will tear instead of punch as a response of being struck by the bullet, and give one the appearance of keyholing. Just a thought.
|
|
|
|
|
|
#3 |
|
User
Join Date: Mar 2013
Posts: 53
Thanks: 108
Thanked 61 Times in 19 Posts
|
I'm more of a rifle shooter, but if that was my pistol I'd give it a careful cleaning, make a cerrosafe cast of the chamber, and then I'd slug the bore. Now...after you fire your pistol, what do the fired cases look like?
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|