Second luger - shooter...key holing issues

bubbapug1 · 01-05-2014, 10:41 PM

Now that you brought up the muzzle issue it does appear as if the plating is not perfect in that area, as in there is some extra material and high spots on the interior diameter. I'll try to get some shots.

As to barrel bulge..no visible bulges, nor any perceptible by touch either, and its the original barrel stamped 522, and than underneath that it says 383.

I am going to mic the muzzle to se if its concentric. I just had a 1911 have that exact issue.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-05-2014, 10:41 PM	#8
bubbapug1 User Join Date: Feb 2013 Location: SoCal Posts: 28 Thanks: 6 Thanked 5 Times in 4 Posts	Now that you brought up the muzzle issue it does appear as if the plating is not perfect in that area, as in there is some extra material and high spots on the interior diameter. I'll try to get some shots. As to barrel bulge..no visible bulges, nor any perceptible by touch either, and its the original barrel stamped 522, and than underneath that it says 383. I am going to mic the muzzle to se if its concentric. I just had a 1911 have that exact issue.