Got it! With range update!

Tony Min · 09-16-2013, 12:44 PM

I looked in the area. Is it correct the take down lever spring isn't visible unless the lever is out? It held fine for the first 60 or so shots. Then suddenly the trigger was acting up and I noticed the lever was down a few degrees.
When I pulled it back up the gun fired normally but now it would creep down every couple of shots.
When I came home and took down the weapon I sprayed out the area real good and lubed it. It seemed to regain some of the positive click. But I don't know if it's enough to withstand the shock of being fired. It has a much more positive click in the open position.
All other springs were original in this gun. I changed the recoil spring and the spring on the firing pin plunger.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-16-2013, 12:44 PM	#1
Tony Min User Join Date: Jul 2013 Posts: 169 Thanks: 0 Thanked 21 Times in 14 Posts	I looked in the area. Is it correct the take down lever spring isn't visible unless the lever is out? It held fine for the first 60 or so shots. Then suddenly the trigger was acting up and I noticed the lever was down a few degrees. When I pulled it back up the gun fired normally but now it would creep down every couple of shots. When I came home and took down the weapon I sprayed out the area real good and lubed it. It seemed to regain some of the positive click. But I don't know if it's enough to withstand the shock of being fired. It has a much more positive click in the open position. All other springs were original in this gun. I changed the recoil spring and the spring on the firing pin plunger.