![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
|
|
#1 |
|
User
Join Date: Jun 2002
Location: Iowa
Posts: 769
Thanks: 0
Thanked 20 Times in 12 Posts
|
DWM claimed the original 7.65 pistol load ran a 93 grain bullet out of a 4.5 inch pistol (not test barrel) at 1220 fps. I have reason to believe this claim is quite true.
Winchester claims 93 grains at 1220 fps from a 4.5 inch barrel. I have a LOT of reason to believe this is NOT true. I'e never got close to 1220 from any of several pistols with 4, 4.5, 5, or 6 inch basrrels. The original carbine load ran around 40,000 cup and I believe the working carbine load also served as the proof load for the pistol. SAAMi spec is 28,000 cup for the 7.65 vs 32,000 cup for ythe 9 mm. Hey guys! It's the same pistol in either caliber! Why down grade the 7.65? Timing: The Luger unlocks fairly late compared to say, a 1911. The pressure will drop to zero before unlocking begins. At a given velocity, a heavier bullet will provide more impulse. Keeping in mind there is a pressure limit. Last edited by unspellable; 02-21-2013 at 10:00 AM. |
|
|
|
| The following 4 members says Thank You to unspellable for your post: |
|
|
#2 |
|
Lifer
Lifetime Forum Patron Join Date: Sep 2006
Location: Wichita, KS USA
Posts: 453
Thanks: 573
Thanked 96 Times in 53 Posts
|
for possible reference here is an original dewey custom luger base with the original micro sight replaced with a bowen sight
the original micro sight had a damaged front section from usage as elevation - was bent at the point of the elevation adj screw thanks Bill |
|
|
|
| The following 2 members says Thank You to lfid for your post: |
![]() |
| Thread Tools | |
| Display Modes | |
|
|