Luger Heavy Barrel Not Cycling

RAY1946 · 02-17-2013, 10:39 AM

If you go with a 110 gr. bullet, be sure you also use a slow powder. I am thinking Accurate #7. I think with this combination the pressure would be pretty much even all the way to the muzzle, thus insuring enough rearward inertia from the recoiling members to create a full cycle of the toggle and reciever.

Along with the above, you might want to get the LOWER power Wolff spring. I think its rated at 36lb.........................

Good Luck...........

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

02-17-2013, 10:39 AM	#17
RAY1946 User Join Date: Oct 2011 Posts: 77 Thanks: 178 Thanked 14 Times in 9 Posts	If you go with a 110 gr. bullet, be sure you also use a slow powder. I am thinking Accurate #7. I think with this combination the pressure would be pretty much even all the way to the muzzle, thus insuring enough rearward inertia from the recoiling members to create a full cycle of the toggle and reciever. Along with the above, you might want to get the LOWER power Wolff spring. I think its rated at 36lb......................... Good Luck...........